Intrusion Prevention

 View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

IDP input and output ports?

Jump to Best Answer
This thread has been viewed 0 times
  • 1.  IDP input and output ports?

    Posted 01-01-2010 04:07

    I want to ask what port of IDP is input and what is output port? I mean what port (first or second) should be connected with perimeter firewall and what port should be connected to core switch for traffic inspection?



  • 2.  RE: IDP input and output ports?
    Best Answer

    Posted 01-01-2010 23:58

    The ports are grouped together in twos.  So if eth2 and eth3 are setup in vr1 for inside traffic incomming goes to eth2 and out going goes to eth3.  I setup my idp 800 to eth2 comes from firewall and eth3 goes to core switch.

  • 3.  RE: IDP input and output ports?

    Posted 01-02-2010 13:00