Hi all,
I have an EX4200 in a lab environment which recently lost power. Unfortunately after the reboot, one of my switches in a virtual chassis started having issues.
The switch appears to boot perfectly ok, with what I can tell no distinct errors. However after reaching the login prompt, roughly 10-20 seconds the system calls a reboot and the switch enters a reboot loop. You will also see that it records the reboot as normal.
So far I have reinstalled the firmware:
15.1R7-S6.3 (current firmware and firmware installed when issue started)
12.3R1.7 (tested older firmware) the log captured is from this, but otherwise it is exactly the same symptoms.
One thing I have spotted:
On 12.3:
path /var/jail does not exist Automatic reboot in progress...On 15.1:
Error execution /packages/mnt/jweb-ex-15.1R7-S6.3/mount.post: path /var/jail does not exist Automatic reboot in progress...Wondering if anybody has any ideas on what the issue might be? Could J-Web be the issue?
I have also opened the switch as I thought maybe I could swap an SD-Card or CMOS battery, however nothing seems replaceable.
12.3 log:
syncing disks... Syncing disks, buffers remaining... 4 4 3 3 3 3 1 1 0 1 1
Final sync complete
2 0 Uptime: 3m12s
recorded reboot as normal shutdown
Rebooting...
U-Boot 1.1.6 (Jun 5 2012 - 02:26:04)
Board: EX4200-48PX 4.31
EPLD: Version 10.0 (0x82)
DRAM: Initializing (1024 MB)
FLASH: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder@greteth, Tue Jun 5 01:50:12 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0xa810a4+0xb03c8 syms=[0x4+0x8f090+0x4+0xd1654]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R1.7 #0: 2013-01-26 01:32:53 UTC
builder@dagmath.juniper.net:/volume/build/junos/12.3/release/12.3R1.7/obj-powerpc/junos/bsd/kernels/JUNIPER-EX/kernel
can't re-use a leaf (all_slot_serialid)!
Timecounter "decrementer" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.3
cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE>
real memory = 1047527424 (999 MB)
avail memory = 1025544192 (978 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES platform properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:113
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:113
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 54:4b:8c:c5:11:ff
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.1 on pci0
usb0: EHCI version 1.0
usb0: <NEC uPD 72010x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 20 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef09000-0xfef09fff,0xe4000000-0xe7ffffff,0xec100000-0xec1fffff irq 41 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xac000000-0xac0fffff,0xa8000000-0xabffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
pcib5: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
mpfe2: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0xb0000000-0xb3ffffff irq 19 at device 0.0 on pci6
mpfe_adcr_shadow_alloc: allocated idx: 2
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 100 ..
bmeb: bmeb_lib_init done 0x82b4b000, addr 0x80a82514
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread "wkupdaemon" (pid 41) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md10...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md12...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md14...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md16...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R1.7 signed by PackageProduction_12_3_0
Executing /packages/mnt/jweb-ex-12.3R1.7/mount.post..
Automatic reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 28290 free (74 frags, 3527 blocks, 0.1% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 62476 free (116 frags, 7795 blocks, 0.2% fragmentation)
savecore: Router rebooting after a normal shutdown...
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188789 free (29 frags, 23595 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31590 free (30 frags, 3945 blocks, 0.1% fragmentation)
ln: /var/db/dcd.snmp_ix: File exists
ln: /var/db/snmp_engine.db: File exists
Creating initial configuration...mgd: Running FIPS Self-tests
mgd: Expect an everiexec: no fingerprint for file='/sbin/kats/cannot-exec' fsid=75 fileid=51404 uid=0 pid=536
xec Authentication error...
mgd: /sbin/kats/run-tests: /sbin/kats/cannot-exec: Authentication error
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertypeLoading the EX-series platform NETPFE module
;/modules/ifpfe_drv;/modules/platform;/modules;
kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:.
Sat Jan 26 03:58:33 UTC 2013
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27778 free (10 frags, 3471 blocks, 0.0% fragmentation)
Amnesiac (ttyu0)
login: Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...7 6 3 5 5 5 5 4 4 3 2 2 1 2 2 2 1 3 3 3 2 3 3 3 3 2 2 2 1 2 2 2 3 3 3 3 3 2 3 3 2 1 2 2 2 2 2 3 3 2 3 3 3 1 3 2 2 0 2 2 timed out
syncing disks... Syncing disks, buffers remaining... 5 5 4 4 4 4 0 2 2 2 1 1
Final sync complete
1 0 pid 1261 (sfid), uid (0): Path `/var/tmp/sfid.core.0.gz' failed on initial open test, error = 20
pid 1262 (vccpd), uid (0): Path `/var/tmp/vccpd.core.0.gz' failed on initial open test, error = 20
Uptime: 3m20s
recorded reboot as normal shutdown
Rebooting...
U-Boot 1.1.6 (Jun 5 2012 - 02:26:04)
Board: EX4200-48PX 4.31
EPLD: Version 10.0 (0x82)
DRAM: Initializing (1024 MB)
FLASH: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder@greteth, Tue Jun 5 01:50:12 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0xa810a4+0xb03c8 syms=[0x4+0x8f090+0x4+0xd1654]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R1.7 #0: 2013-01-26 01:32:53 UTC
builder@dagmath.juniper.net:/volume/build/junos/12.3/release/12.3R1.7/obj-powerpc/junos/bsd/kernels/JUNIPER-EX/kernel
can't re-use a leaf (all_slot_serialid)!
Timecounter "decrementer" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.3
cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE>
real memory = 1047527424 (999 MB)
avail memory = 1025544192 (978 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES platform properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:113
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:113
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 54:4b:8c:c5:11:ff
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.1 on pci0
usb0: EHCI version 1.0
usb0: <NEC uPD 72010x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 20 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef09000-0xfef09fff,0xe4000000-0xe7ffffff,0xec100000-0xec1fffff irq 41 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xac000000-0xac0fffff,0xa8000000-0xabffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
pcib5: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
mpfe2: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0xb0000000-0xb3ffffff irq 19 at device 0.0 on pci6
mpfe_adcr_shadow_alloc: allocated idx: 2
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 100 ..
bmeb: bmeb_lib_init done 0x82b4b000, addr 0x80a82514
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread "wkupdaemon" (pid 41) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md10...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md12...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md14...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R1.7 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md16...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R1.7 signed by PackageProduction_12_3_0
Executing /packages/mnt/jweb-ex-12.3R1.7/mount.post..
Automatic reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 28290 free (74 frags, 3527 blocks, 0.1% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 62511 free (143 frags, 7796 blocks, 0.2% fragmentation)
savecore: Router rebooting after a normal shutdown...
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188789 free (29 frags, 23595 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31590 free (30 frags, 3945 blocks, 0.1% fragmentation)
ln: /var/db/dcd.snmp_ix: File exists
ln: /var/db/snmp_engine.db: File exists
Creating initial configuration...mgd: Running FIPS Self-tests
mgd: Expect an everiexec: no fingerprint for file='/sbin/kats/cannot-exec' fsid=75 fileid=51404 uid=0 pid=536
xec Authentication error...
mgd: /sbin/kats/run-tests: /sbin/kats/cannot-exec: Authentication error
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertypeLoading the EX-series platform NETPFE module
;/modules/ifpfe_drv;/modules/platform;/modules;
kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:.
Sat Jan 26 03:58:22 UTC 2013
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27778 free (10 frags, 3471 blocks, 0.0% fragmentation)
Amnesiac (ttyu0)
login: Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...22 19 6 6 6 6 6 4 4 4 1 2 2 2 2 2 2 3 3 3 3 3 2 2 2 1 2 2 2 2 2 2 3 2 3 3 3 2 2 2 1 2 2 2 2 2 2 3 3 3 3 3 2 2 2 1 2 2 2 1 timed out
syncing disks... Syncing disks, buffers remaining... 4 4 4 4 3 3 3 1 1 0 1 1
Final sync complete
2 0 Uptime: 3m11s
recorded reboot as normal shutdown
Rebooting...
15.1:
syncing disks... All buffers synced.
Uptime: 2m49s
recorded reboot as normal shutdown
Rebooting...
U-Boot 1.1.6 (Jun 5 2012 - 02:24:53)
Board: EX4200-48PX 4.31
EPLD: Version 10.0 (0x82)
DRAM: Initializing (1024 MB)
FLASH: 8 MB
Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder@greteth, Tue Jun 5 01:50:12 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/kernel text=0xaefd60 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x84ed0+0xd12bc \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-syms=[0x4+0x9def0\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+0x4+0xec6ec-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel] in 1 second...
Booting [/kernel]...
Kernel entry at 0x800000e0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2020, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1R7-S6.3 #0: 2020-01-03 07:08:15 UTC
builder@monarth:/volume/build/junos/15.1/release/15.1R7-S6.3/obj/powerpc/junos/bsd/kernels/JUNIPER-EX/kernel
can't re-use a leaf (all_slot_serialid)!
Timecounter "decrementer" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.3
cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE>
real memory = 1044381696 (996 MB)
avail memory = 1022398464 (975 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:113
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:113
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 54:4b:8c:c5:11:ff
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.1 on pci0
usb0: EHCI version 1.0
usb0: <NEC uPD 72010x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 20 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef09000-0xfef09fff,0xe4000000-0xe7ffffff,0xec100000-0xec1fffff irq 41 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xac000000-0xac0fffff,0xa8000000-0xabffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
pcib5: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
mpfe2: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0xb0000000-0xb3ffffff irq 19 at device 0.0 on pci6
mpfe_adcr_shadow_alloc: allocated idx: 2
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 100 ..
Loading Redundant LT driver
Registered AMT tunnel Encap with UDP Tunnel!
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread "wkupdaemon" (pid 44) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/junos via /dev/mdctl...
Mounted junos-ex package on /dev/md0...
Verified manifest signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Verified jboot signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Verified junos-ex-15.1R7-S6.3 signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Verified fips-mode-powerpc-15.1R7-S6.3 signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Mounted jdocs-ex package on /dev/md4...
Verified manifest signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Verified jdocs-ex-15.1R7-S6.3 signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Mounted junos-ex-4200 package on /dev/md6...
Verified manifest signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Verified junos-ex-4200-15.1R7-S6.3 signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Verified jweb-ex-15.1R7-S6.3 signed by PackageProductionECP256_2020 method ECDSA256+SHA256
Executing /packages/mnt/jweb-ex-15.1R7-S6.3/mount.post..
Error execution /packages/mnt/jweb-ex-15.1R7-S6.3/mount.post: path /var/jail does not exist
Automatic reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 11937 free (25 frags, 1489 blocks, 0.0% fragmentation)
Soft-updates on / is disabled
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
317 files, 501 used, 61377 free (129 frags, 7656 blocks, 0.2% fragmentation)
Soft-updates on /var is disabled
Computing slice and partition sizes for /dev/da0 ...
checking for core dump...
savecore: Router rebooting after a normal shutdown...
No dump exists
** Last Mounted on /var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
10 files, 8467 used, 177347 free (35 frags, 22164 blocks, 0.0% fragmentation)
Soft-updates on /var/tmp is disabled
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
20 files, 19 used, 31043 free (27 frags, 3877 blocks, 0.1% fragmentation)
Soft-updates on /config is disabled
rm: /var/etc/pam.conf: Operation not permitted
mkdir: /mfs/var/sdb: No such file or directory
mkdir: /mfs/var/sdb: No such file or directory
ln: /var/db/dcd.snmp_ix: File exists
ln: /var/db/snmp_engine.db: File exists
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=75 fileid=51404 gen=1 uid=0 pid=524
mgd: FIPS Self-tests Skipped
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;Loading the CHMIC module
/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/modules/platform;/modules;
Loading the EX-series platform NETPFE module
kld netpfe drv: ifpfed_chmic ifpfed_ml_cmn ifpfed_svcskld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertycryptosoft0: <software crypto> on nexus0
pe_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_onIPsec: Initialized Security Association Processing.
_ifup: 1 -> 1
ipsec kld kats kldkldload: can't load kats.ko: File exists
.
Doing additional network setup:.
Starting final network daemons:.
starting local daemons:set cores for group access
.
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 11457 free (25 frags, 1429 blocks, 0.0% fragmentation)
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
Fri Jan 3 08:11:36 UTC 2020
Amnesiac (ttyu0)
login: Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...9 8 3 4 4 3 4 2 2 0 1 1 1 1 0 0 0 0 done
syncing disks... All buffers synced.
pid 1210 (sfid), uid (0): Path `/var/tmp/sfid.core.0.gz' failed on initial open test, error = 2
Uptime: 2m54s
recorded reboot as normal shutdown
Rebooting...