Junos OS

 View Only
last person joined: 3 days ago 

Ask questions and share experiences about Junos OS.
  • 1.  upgrade from 20.4R2-S2.2 to 21.1

    Posted 01-24-2022 15:36

    Bonjour everybody,

    Junos 21.3R1 was identified in JSA11287 Security bulletin   as resolving multiple vulnerabilities.

    So I decided to install it on a couple of 2300-C in my lab while waiting for it to become the recommended version by JTAC

    (https://kb.juniper.net/InfoCenter/index?page=content&id=KB21476&actp=METADATA

      My 2300 are running JUNOS 20.4R2-S2.2. now.

    I used the following options to install the new image , as I have been doing about a zillion times.

    request system software add /tmp/junos-arm-32-21.3R1.9.tgz force unlink no-copy

    ... but after the removal of some /var files, the installation stopped with the following message

    ERROR: Cannot validate junos-arm-32-21.3R1.9.tgz: requires osmajor 12 kernel support.

    NOTICE: Use the 'no-validate' option to proceed.

     

    Now I will try using the no-validate option, since this is a lab,  but I was a bit concerned on the consequences of using this option, since I have been doing many times those kind of upgrade without this option being requested.

    Any thoughts ?

     

    Thanks,

     

    __________________________________________

    Michel Lapointe

    Projet GIRAT 2.0

    Michel.lapointe@girat.org

    Cell : (819) 279-0844

     

    GIRAT     http://www.girat.org

    (Gestion de l'inforoute régionale de l'Abitibi-Témiscamingue)

    Girat_Image30x116

     



  • 2.  RE: upgrade from 20.4R2-S2.2 to 21.1

    Posted 01-24-2022 16:27

    You see this message because there was an upgrade in the Kernel-Space below JunOS (BSD-Upgrade) :)

    And since an older Version cannot correctly verify a new Version this message is expected and can safely be used.



    ------------------------------
    Christian Scholz
    Juniper Networks Ambassador | JNCIE-SEC #374
    Mail: chs@ip4.de
    Blog: jncie.eu | Twitter: @chsjuniper | YT-Channel: netchron
    ------------------------------



  • 3.  RE: upgrade from 20.4R2-S2.2 to 21.1

     
    Posted 01-24-2022 17:13

    Hello,

    here you can find the public document for this behavior:

    https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1568757


    By the way, the "unlink" upgrade command should not be used on EX series platforms, even the knob is visible:

    "(Optional) On M Series, T Series, and MX Series routers, use the unlink option to remove the software package from this directory after a successful upgrade is completed."

    I've seen strange behavior in the past by using the unlink option on alternative platforms.



    ------------------------------
    ------------------------------
    If my answer provides the solution, please mark my post as "Best Answer".
    If you think my answer helps, please "Recommend" my post.
    ------------------------------



  • 4.  RE: upgrade from 20.4R2-S2.2 to 21.1

    Posted 01-24-2022 17:14
    Actually unlink is set by default now on the EX Series - usually it even shows this if you set this option :)

    ------------------------------
    Christian Scholz
    Juniper Networks Ambassador | JNCIE-SEC #374
    Mail: chs@ip4.de
    Blog: jncie.eu | Twitter: @chsjuniper | YT-Channel: netchron
    ------------------------------



  • 5.  RE: upgrade from 20.4R2-S2.2 to 21.1

    Posted 01-25-2022 05:32

    Bonne soirée  Christian,

                   Yes, I remember seeing the « setting unlink by default" statement appear at the beginning of the adding new image process.

    So I guess I can pretty much remove it from my command and replace it with what I see in the PR1568757 is a mandatory   no-validate option.

     

    Thank you very very much for your quick and useful answers.

     

    Michel Lapointe

    GIRAT

    Rouyn-Noranda

    Quebec

     

     

    De : Christian Scholz (chsjuniper) via Juniper Networks <Mail@community.juniper.net>
    Envoyé : 24 janvier 2022 17:16
    À : Lapointe, Michel <Michel.Lapointe@girat.org>
    Objet : RE: Junos OS : upgrade from 20.4R2-S2.2 to 21.1

     

    Actually unlink is set by default now on the EX Series - usually it even shows this if you set this option :) ------------------------------... -posted to the "Junos OS" community

    Earn 6 Juniper certifications.
    Free training/Discounted exams


    Juniper Email Header

    Junos OS

    Post New Message

     

    Re: upgrade from 20.4R2-S2.2 to 21.1

    Jan 24, 2022 5:14 PM

    Christian Scholz (chsjuniper)

    Actually unlink is set by default now on the EX Series - usually it even shows this if you set this option :)

    ------------------------------
    Christian Scholz
    Juniper Networks Ambassador | JNCIE-SEC #374
    Mail: chs@ip4.de
    Blog: jncie.eu | Twitter: @chsjuniper | YT-Channel: netchron
    ------------------------------

      Reply to Group Online   View Thread   Recommend   Forward  


    Hello,

    here you can find the public document for this behavior:

    prsearch.juniper.net/InfoCenter/...


    By the way, the "unlink" upgrade command should not be used on EX series platforms, even the knob is visible:

    "(Optional) On M Series, T Series, and MX Series routers, use the unlink option to remove the software package from this directory after a successful upgrade is completed."

    I've seen strange behavior in the past by using the unlink option on alternative platforms.



    ------------------------------
    ------------------------------
    If my answer provides the solution, please mark my post as "Best Answer".
    If you think my answer helps, please "Recommend" my post.



     

     

    You are receiving this message because you followed the 'upgrade from 20.4R2-S2.2 to 21.1' message thread. To unsubscribe from this message thread, go to Unsubscribe.

    Update your email preferences to choose the types of email you receive

    Unsubscribe from all participation emails




    Original Message:
    Sent: 1/24/2022 5:13:00 PM
    From: Christian Scholz (chsjuniper)
    Subject: RE: upgrade from 20.4R2-S2.2 to 21.1

    Actually unlink is set by default now on the EX Series - usually it even shows this if you set this option :)

    ------------------------------
    Christian Scholz
    Juniper Networks Ambassador | JNCIE-SEC #374
    Mail: chs@ip4.de
    Blog: jncie.eu | Twitter: @chsjuniper | YT-Channel: netchron
    ------------------------------

    Original Message:
    Sent: 01-24-2022 16:48
    From: Daniel
    Subject: upgrade from 20.4R2-S2.2 to 21.1

    Hello,

    here you can find the public document for this behavior:

    https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1568757


    By the way, the "unlink" upgrade command should not be used on EX series platforms, even the knob is visible:

    "(Optional) On M Series, T Series, and MX Series routers, use the unlink option to remove the software package from this directory after a successful upgrade is completed."

    I've seen strange behavior in the past by using the unlink option on alternative platforms.



    ------------------------------
    ------------------------------
    If my answer provides the solution, please mark my post as "Best Answer".
    If you think my answer helps, please "Recommend" my post.