Hi ,
Thanks for all helps in the past. I wonder if anyone has met the same challenge or I missed something.
I tried to set up LAG link to connect to Ciena 5160 but the uplink module 1g port won't show.
set chassis fpc 0 pic 1 sfpplus pic-mode 1g
root@C13-45-Junper-4200# run show chassis pic fpc-slot 0 pic-slot 1
FPC slot 0, PIC slot 1 information:
Type 2x 10GE SFP+
State Online
PIC version 1.7
Uptime 57 minutes, 45 seconds
PIC port information:
Fiber Xcvr vendor Wave- Xcvr
Port Cable type type Xcvr vendor part number length Firmware
0 unknown cable n/a CIENA-WXZ XCVR-A10Y31 1310 nm 0.0
1 unknown cable n/a CIENA-WXZ XCVR-A10Y31 1310 nm 0.0
{master:0}[edit]
root@C13-45-Junper-4200# run show interfaces ge-0/1/0
error: device ge-0/1/0 not found
Thanks in advance!
------------------------------
KEITH GAO
------------------------------