Hi,
I have a question about pinging out from an SVI to the internet.
AS a relative beginner I setup a test SRX320 and setup NAT on the LAN interface.
It didn't appear to be working , so I put a Laptop onto the sub interface, I was going to do a Traceroute to 8.8.8.8 but I found if worked perfectly and I could browse the internet fine.
My home Network is 192.168.0.x /25 and my ISP router is 192.168.0.1 I set the juniper ge-0/0/0.0 to 192.\68.0.202/24 and a gateway of 192.168.0.1 and it works fine
I setup NAT and was testing it with ping 8.8.8.8 source 192.168.10.1 ( The LAN interface on ge-0/0/1.0 ) and it fails to ping 8.8.8.8.
When I connect a Laptop to 192.168.10.1 ( IP Address 192.168.10.2 ) to try and fault find where the issue is I find it can successfully ping 8.8.8.8
I've uploaded my config etc. any help would be Appreciated.
------------------------------
John Kinnaird
------------------------------