Hello All,
I have a problem with finish setup cluster on two SRX550 devices (firmware version 12.3X48-D105.4).
I did everything according to this manual:
CEC Juniper Community
but for some reason the cluster not established.
Node0 and Node1 can't "see" each other.
Firmware version is the same on both devices. (also on alternate media internal)
Licenses also the same on both devices.
I already tried:
- change the cables
- change the fabric ports from 0/0/2 to 0/0/5.
- reboot two devices simultanously.
- copy configuration and manually paste to node1.
- load factory default on both devices and configure again from begining
- delete all default config before start configuration cluster (on both devices).
I have no idea what can I do more.
Could someone look at my config and advise what could be wrong please?
====================== Configuration
Device A:
root@deviceA> show configuration | display set
set version 12.3X48-D105.4
set groups node0 system host-name DeviceA
set groups node0 interfaces fxp0 unit 0 family inet address 10.10.10.7/26
set groups node1 system host-name DeviceB
set groups node1 interfaces fxp0 unit 0 family inet address 10.10.10.8/26
set apply-groups "${node}"
set system root-authentication encrypted-password "****************"
set chassis cluster reth-count 2
set chassis cluster redundancy-group 0 node 0 priority 100
set chassis cluster redundancy-group 0 node 1 priority 1
set chassis cluster redundancy-group 1 node 0 priority 100
set chassis cluster redundancy-group 1 node 1 priority 1
set interfaces fab0 fabric-options member-interfaces ge-0/0/5
set interfaces fab1 fabric-options member-interfaces ge-9/0/5
{primary:node0}
root@deviceA>
Device B:
root> show configuration | display set
set version 12.3X48-D105.4
set system root-authentication encrypted-password "****************"
{primary:node1}
root>
====================== Cluster status
Device A:
root@DeviceA> show chassis cluster status
Monitor Failure codes:
CS Cold Sync monitoring FL Fabric Connection monitoring
GR GRES monitoring HW Hardware monitoring
IF Interface monitoring IP IP monitoring
LB Loopback monitoring MB Mbuf monitoring
NH Nexthop monitoring NP NPC monitoring
SP SPU monitoring SM Schedule monitoring
CF Config Sync monitoring RE Relinquish monitoring
Cluster ID: 1
Node Priority Status Preempt Manual Monitor-failures
Redundancy group: 0 , Failover count: 1
node0 100 primary no no None
node1 0 lost n/a n/a n/a
Redundancy group: 1 , Failover count: 1
node0 0 primary no no CS
node1 0 lost n/a n/a n/a
{primary:node0}
Device B:
root> show chassis cluster status
Monitor Failure codes:
CS Cold Sync monitoring FL Fabric Connection monitoring
GR GRES monitoring HW Hardware monitoring
IF Interface monitoring IP IP monitoring
LB Loopback monitoring MB Mbuf monitoring
NH Nexthop monitoring NP NPC monitoring
SP SPU monitoring SM Schedule monitoring
CF Config Sync monitoring RE Relinquish monitoring
Cluster ID: 1
Node Priority Status Preempt Manual Monitor-failures
Redundancy group: 0 , Failover count: 1
node0 0 lost n/a n/a n/a
node1 1 primary no no None
{primary:node1}
====================== Cluster Interfaces:
Device A:
root@DeviceA> show chassis cluster interfaces
Control link status: Down
Control interfaces:
Index Interface Monitored-Status Internal-SA
0 fxp1 Down Disabled
Fabric link status: Down
Fabric interfaces:
Name Child-interface Status
(Physical/Monitored)
fab0 ge-0/0/2 Up / Down
fab0
Redundant-pseudo-interface Information:
Name Status Redundancy-group
lo0 Up 0
{primary:node0}
root@DeviceA>
Device B:
root> show chassis cluster interfaces
Control link status: Down
Control interfaces:
Index Interface Monitored-Status Internal-SA
0 fxp1 Down Disabled
Fabric link status: Down
Fabric interfaces:
Name Child-interface Status
(Physical/Monitored)
fab1
fab1
Redundant-pseudo-interface Information:
Name Status Redundancy-group
lo0 Up 0
{primary:node1}
root>
====================== Cluster statistics:
Device A
root@DeviceA> show chassis cluster statistics
Control link statistics:
Control link 0:
Heartbeat packets sent: 373
Heartbeat packets received: 0
Heartbeat packet errors: 0
Fabric link statistics:
Child link 0
Probes sent: 487
Probes received: 0
Child link 1
Probes sent: 0
Probes received: 0
Device B:
root> show chassis cluster statistics
Control link statistics:
Control link 0:
Heartbeat packets sent: 3763
Heartbeat packets received: 0
Heartbeat packet errors: 0
Fabric link statistics:
Child link 0
Probes sent: 0
Probes received: 0
Child link 1
Probes sent: 0
Probes received: 0