Hello,
Please see image for an idea of what I am trying to do, but I will do my best to explain it below as well.
I set up 2 SRX 1500's in a chassis cluster. I added physical ports to logical link reth1. The ports for reth1 are connected to an ex3300 that would serve as an intermediary L2 step to ISP1 and ISP2. The connection between reth1 and the switch are setup in LACP. LACP is up and functional.
I want to source NAT Static IP servers . I ran across a couple of errors when attempting to assign physical ports in Security Zone Servers because it I had set the physical ports as access ports and learned that family ethernet-switching and family inet cannot be in the same Security Zone. Please note I added Reth1.100 as an interface to Security Zone Servers first and then attempted to add ports ge-0/0/10 and ge-0/0/11 after when I received the error that all interfaces in the security zone need to be a part of the same family.
I learned that here:
https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/topic-map/layer-2-interfaces.html#id-understanding-mixed-mode-transparent-and-route-mode-on-security-devices
------------------------------
D POM
------------------------------