I have a following topology
The current routing table is as follows:
lab@R3# run show route 2001:240::32/32
inet6.0: 149 destinations, 149 routes (149 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
2001:240::/32 *[BGP/170] 00:00:20, localpref 100, from 172.20.25.5
AS path: (65002) 74.39 33112 60177 60637 30709 57763 I, validation-state: unverified
> to fe80::250:5600:23a9:2abe via ge-0/0/4.35
I need to make this route to use LSP as follows:
lab@R3# run show route 2001:240::32/32
inet6.0: 149 destinations, 149 routes (149 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
2001:240::/32 *[BGP/170] 00:16:29, localpref 100, from 172.20.25.5
AS path: (65002) 74.39 33112 60177 60637 30709 57763 I, validation-state: unverified
> to 172.20.20.14 via ge-0/0/4.35, label-switched-path r3-to-r5
IGP between R3 and R5 is ISIS. I added the following configuration on both routers (R3 and R5)
set protocols isis topologies ipv6-unicast
set protocols isis traffic-engineering family inet6 shortcuts
But I could not make this route to use LSP.
LSP is configured
root@R3# run show rsvp session | match R3-to-R5
172.20.25.5 172.20.25.3 Up 0 1 FF - 301536 r3-to-r5
[edit]
root@R3# run show rsvp session | match R5-to-R3
172.20.25.3 172.20.25.5 Up 0 1 FF 300160 - r5-to-r3
root@R5# run show rsvp session | match R3-to-R5
172.20.25.5 172.20.25.3 Up 0 1 FF 301536 - r3-to-r5
[edit]
root@R5# run show rsvp session | match R5-to-R3
172.20.25.3 172.20.25.5 Up 0 1 FF - 300160 r5-to-r3
Any ideas and insights will be really appreciated.