Hello
Maybe a dumb question, but I cant seem to find a clear answer.
Can someone confirm that this a correct understanding of how it works:
I set my AP with an SSID and have that mapped to a VLAN "100".
I configure the AP to tunnel this vlan to the mist edge to the Tunnel IP.
my client attaches to the SSID and the traffic is tunneled to the Mist EDGE and the dumped out the uplink port on vlan "100"?
this is essentially a L2 stretch? So I need to have DHCP scopes etc provided from my upstream device on vlan "100"?
Is this a correct understanding?
------------------------------
William Jackson
------------------------------