It looks like you are adding the interface to the incorrect vlan I assume that irb.411 would be under
VLAN411_MGMT and not default.
And you also need to create the interface itself under interfaces
root@SPHARE# show vlans
VLAN11_SRV {
description ***SERVER-MGMT-VLAN***;
vlan-id 11;
}
VLAN411_MGMT {
vlan-id 411;
l3-interface irb.411;
}
default {
}
interfaces
irb {
unit 411 {
family inet {
address 10.0.1.1/24;
}
}
}
------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home------------------------------
Original Message:
Sent: 12-28-2022 06:32
From: Anonymous User
Subject: L3 -interface creation error
This message was posted by a user wishing to remain anonymous
root@SPHARE# show vlans
VLAN11_SRV {
description ***SERVER-MGMT-VLAN***;
vlan-id 11;
}
VLAN411_MGMT {
vlan-id 411;
}
default {
##
## Warning: l3-interface can be configured only under vlans with 'vlan-id'/'vlan-tags'
## Warning: Interface must already be defined under [edit interfaces]
##
l3-interface irb.411;
}