Junos OS

 View Only
last person joined: 19 hours ago 

Ask questions and share experiences about Junos OS.
  • 1.  Junos Config partial Loaded on MX204 22.R3

    Posted 04-27-2023 16:22

    Hey,

    after upgrading a recently buyed MX204 from Junos 20.2 to 21.4R3 to 22.2R3 i startet to configure chunk wise the router. Now nearly down and teste reboot and other option i got into the following error.  The configuration seems not to load properly and the console show the following error. 

    Creating initial configuration: ...
    mgd: error: Cannot read configuration: Database is already open
    Chassis control process: <xnm:warning xmlns="http://xml.juniper.net/xnm/1.1/xnm" xmlns:xnm="http://xml.juniper.net/xnm/1.1/xnm">
    Chassis control process: <source-daemon>chassisd</source-daemon>
    Chassis control process: <edit-path>[edit]</edit-path>
    Chassis control process: <statement>chassis</statement>
    Chassis control process: <message>Chassis configuration for network services has been changed. A system reboot is mandatory. Please reboot *ALL* routing engines NOW. Continuing without a reboot might result in unexpected system behavior.</message>
    Chassis control process: </xnm:warning>
    mgd: error: configuration check-out failed
    Warning: Failed to commit active configuration.
    Warning: Trying to commit recovery mode configuration.
    mgd: error: Unable to find the rescue configuration file: /config/rescue.conf
    Warning: Commit failed, activating partial configuration.
    Warning: Edit the router configuration to fix these errors.

    After Login in can commit but if i make a show |compare i see no difference. After the commit the configuration is loaded and the device work as expected. In Idea about that issue? 

    root@:/var/tmp # cli
    Apr 27 14:48:14   last message repeated 34 times
    Apr 27 14:48:18   cli[22093]: login_getclass: unknown class 'j-idle-timeout'
    root> cApr 27 14:48:19   gkmd[19695]: IKED-PKID socket creation failed
    onfigure
    Entering configuration mode
    The configuration has been changed but not committed

    [edit]
    root# Apr 27 14:48:24   gkmd[19695]: IKED-PKID socket creation failed
    commit
    E client.cc:1683 No output to return
    Apr 27 14:49:04   last message repeated 8 times
    Apr 27 14:49:08   gkmd[22264]: Initialized Empty Buffer (44 bytes), Message length: 44
    Apr 27 14:49:08   mgd[22094]: UI_COND_GROUPS_COMMIT_ABORT: Cond-Groups: Timer based conditional groups are reset till warnings/errors are addressed.
    Apr 27 14:49:09   gkmd[19695]: IKED-PKID socket creation failed
    Apr 27 14:49:11 jlaunchd 19413 - - general-authentication-service (PID 19749) terminate signal 15 sent
    Apr 27 14:49:11 jlaunchd 19413 - - ethernet-connectivity-fault-management (PID 19770) terminate signal 15 sent
    Apr 27 14:49:11   jpppd: JPPPD_ENTERED: applicationTerminate: entered
    Apr 27 14:49:11   jpppd: JPPPD_ISSU_WAIT_TIMER_DTOR: pid = 19755: ~PppIssuMgr: dtor
    Apr 27 14:49:11   jpppd[19755]: Shutting down SHM-IPC
    Apr 27 14:49:11   jpppd[19755]: Connection 0x5eed3cc from jl2tpd is terminating
    Apr 27 14:49:11   jpppd[19755]: Connection 0x5eed3a0 to jl2tpd is terminating
    Apr 27 14:49:12 jlaunchd 19413 - - Registered PID 22781(license-service): new process
    Apr 27 14:49:12 jlaunchd 19413 - - rpcbind-service (PID 19731) exited with status=2
    Apr 27 14:49:12 jlaunchd 19413 - - Registered PID 22798(rpcbind-service): exec_command
    Apr 27 14:49:12 jlaunchd 19413 - - rpcbind-service (PID 22798) started
    Apr 27 14:49:12 jlaunchd 19413 - - Registered PID 22798(rpcbind-service): new process
    Apr 27 14:49:12 jlaunchd 19413 - - group-ipsec-key-management (PID 19695) exited with status=0 Normal Exit
    Apr 27 14:49:12 jlaunchd 19413 - - vrrp (PID 19451) exited with status=0 Normal Exit
    Apr 27 14:49:12 jlaunchd 19413 - - pgm (PID 19708) terminated by signal number 15!
    Apr 27 14:49:12 jlaunchd 19413 - - audit-process (PID 19715) exited with status=0 Normal Exit
    Apr 27 14:49:12 jlaunchd 19413 - - lacp (PID 19775) exited with status=0 Normal Exit
    Apr 27 14:49:12   nfsd[22753]: rpcb_set udp failed
    Apr 27 14:49:12   ppmd[19450]: ppmd_cfm_shutdown: cfm shutdown 0x1dd080c
    Apr 27 14:49:12   ppmd[19450]: ppmd_cfm_shutdown: conn closed 0x1dd080c
    Apr 27 14:49:12   jlaunchd[19413]: smg-service (PID 22766) terminated by signal number 30!
    commit complete



    ------------------------------
    SEBASTIAN BAER
    ------------------------------


  • 2.  RE: Junos Config partial Loaded on MX204 22.R3

    Posted 04-28-2023 10:46
    Edited by spuluka 04-28-2023 13:05

    So i zeroize and add the configuration again and the problem occurs again. I not sure how to fix it.

    EDIT:

    I Rolled back to 21.4R3 and the issue disappeared with the same configuration. 

    ------------------------------
    SEBASTIAN BAER
    ------------------------------