Folks, I am having a routine issue with some newer Juniper EX-2300 switches I have running version 18+
I find when I assign the virtual irb interface for the management VLAN, VLAN 10, and give it an inet address it keeps responding with the error when I attempt to locally ping that interface:
PING 172.16.0.110 (172.16.0.110): 56 data bytes
ping: sendto: Can't assign requested address
Though the irb.10 interface is both bound to VLAN 10, as well as the IP bound to the irb interface:
vlans {
default {
vlan-id 1;
l3-interface irb.0;
}
gc-netmgmt {
vlan-id 10;
l3-interface irb.10;
}
Though the irb interface config LOOKS proper:
irb {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-ex2300-48p-JW3621171066;
}
}
}
unit 10 {
family inet {
address 172.16.0.110/24;
}
}
}
Can anyone help where I am missing the boat. I have LOADS of Cisco experience, and have some Juniper in my dark, distant past, and now I am immersed in Juniper. What am I doing wrong?
------------------------------
NYATH MAXWELL
------------------------------