Routing

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  FPC status showing PRESENT not ONLINE

    Posted 01-31-2023 03:36
    • I need a support on my srx5800 model FW,


      Initially I have an alarm in my redundancy firewall on secondary node 1, with an FPC 8 Major alarm.


      We did JOJI on the card as to see if the alarm will clear,  the alarm did clear after the Jack out Jack in .


      But the status of the FPC slot 8 is only showing as PRESENT now , instead of it to show as ONLINE. 

      I did some couple of command to bring it online , i keep getting Online command not supported for FPC in slot 8. What next can i do ?

       
      request chassis fpc node 1 slot 8 online
      node1:
      --------------------------------------------------------------------------
      Online command not supported for FPC in slot 8
    • show chassis fpc pic-status node 1
      node1:
      --------------------------------------------------------------------------
      Slot 3 Online SRX5k SPC II
      PIC 0 Online SPU Cp
      PIC 1 Online SPU Flow
      PIC 2 Online SPU Flow
      PIC 3 Online SPU Flow
      Slot 7 Online SRX5k IOC II
      PIC 0 Online 10x 1GE(LAN) SFP
      PIC 1 Online 10x 1GE(LAN) SFP
      PIC 2 Online 10x 10GE SFP+
      Slot 8 Present SRX5k SPC II  ( i need to be online )



      Kindly recommend a solution to me to fix this status of the FPC 


    ------------------------------
    olalekan ajayi
    ------------------------------


  • 2.  RE: FPC status showing PRESENT not ONLINE

    Posted 01-31-2023 11:21
    If you already did OIR, in that case better to check with JTAC for RMA.

    Elvin

    ------------------------------
    [Phone]
    ------------------------------



  • 3.  RE: FPC status showing PRESENT not ONLINE

    Posted 01-31-2023 12:40
    Hello Elvin,

    Thanks for the response . I don't have JTAC support at the moment . Is there no other suggested command that can issue ? Rather to force restart the fpc card ?

    ------------------------------
    olalekan ajayi
    ------------------------------