I have a case where we try to connect an ME-X5 to the network with Juniper LR SFP+ transceiver and single-mode fiber.
But we are not able to get it to work.
I found this guide:
3. For ME-X5, ME-X5-M and ME-X10 fiber ports;
a. Request to use SFP Cable OM3 50/125μm / OM4.
OS2 version is not supported.
If the OS2 version is used, frequent LACP flap, packet errors, port not coming up will be observed.
The above issues get resolved once the SFP cable is replaced with OM3/OM4 type.
https://www.mist.com/wp-content/uploads/Mist-Edge-General-Config-Guide-1.pdf
Does this mean that LR optic and single-mode fiber is NOT supported?
Only SR and multi-mode?
------------------------------
Roar Hoel-Spjudvik
------------------------------