Hi Sunil.
In Junos, you configure an RSVP-signalled LSP using :
set protocols mpls label-switched-path LSP1 to 192.168.9.1
You must configure the egress of the LSP. CSPF will be run by default. You can disable CSPF by adding the no-cspf keyword.
--Deepak
Original Message:
Sent: 06-28-2022 07:04
From: Unknown User
Subject: CSPF Juniper
Hi Team,
do we have command to run cspf for particular destination in Junos ?
Below is cisco command :-
show mpls traffic-eng topology path destination x.x.x.x
BR://
SK