Hi James,
The interface configuration looks ok to me, however as you haven't posted the zone config I am unable to comment if its configured or not.
can you try the below command and see if it helps.
set security zones security-zone External interfaces ge-0/0/0 host-inbound-traffic system-services all
Regards,
Brijil
------------------------------
Brijil R
------------------------------
Original Message:
Sent: 10-31-2022 11:15
From: JAMES DAVIES
Subject: Can't ping router from SRX which is directly Connect
I have been installing an SRX340 into a customer site but I am having trouble pinging the routers IP of 192.168.1.1/24 from my SRX which I have set an IP of 192.168.1.252/24. The router is a TP-Link router and I have added a route on the SRX to point the next hop to 192.168.1.1.
Any suggestions?
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.252/24;
------------------------------
JAMES DAVIES
------------------------------