Routing

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  Can I add the same IP for iBGP peer as iccp peer?

    Posted 12-14-2022 01:47
    Hi, thank you for reading.

    I want to add iBGP to my site.(The site is already in service)
    To set iBGP, if it could, I would like to use the same IP as using for MC-LAG peer.
    However, it seems there are no examples and similar ones.

    I checked on vLabs but I am nervous for this because it cannot attach ae-IF on ge-0/0/x
    *Set commands could be commited successfully.

    Please give some tips or concerns about using the same IP.

    I attached diagram images so please see that.
    - the green flame comment and direction objects are what I want to add.
    - LAG is neccesary to get close to the service site.

    Thank you,

    ------------------------------
    Saw
    ------------------------------


  • 2.  RE: Can I add the same IP for iBGP peer as iccp peer?
    Best Answer

    Posted 12-14-2022 01:56
    Hello,

    The bgp should go UP using those IPs.
    If it is used by ICCP there is no problem reusing them with iBGP.

    Regards

    ------------------------------
    ALEXANDRU MINZAT
    ------------------------------



  • 3.  RE: Can I add the same IP for iBGP peer as iccp peer?

    Posted 12-14-2022 03:12
    Hi ALEXANDRU,
     
    Thank you for your quick reply.
    I understood the logic what you said.
     
    I would try additional tests.
     
    Thank you,


    ------------------------------
    Saw Tam
    ------------------------------