Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Documentation Day One Books Knowledge Base Junos Software Versions
Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...
Hi, One SPC2 model just can cater 5g IPSec throughput only. So u need to change ypur SPC2 to SPC3 since SRX5400 just have limited slot. Thanks
Thank you so much for the info, here is the info for SRX 5400. Please kindly advice this spc limitations? > show chassis fpc Temp CPU Utilization (%) Memory Utilization (%) Slot State (C) Total Interrupt ...
Hi, I have a strange message in the logs /kernel: hw.chassis.startup_time update to 1662799071.270472 does anyone know what this means? Running Junos v.21.1 R1.11 on MX104 It doesn't seem to be service affecting yet but solarwinds is logging ...
This message was posted by a user wishing to remain anonymous Hello all, Hope your day is going well. Query: On Cisco device you can use the configuration "encapsulation default" on subinterface. The behaviour is that that subinterface/flow ...
Hi, Can anyone tell me what the following message in the logs mean and if there is a way to drop it? /kernel: hw.chassis.startup_time update to 1662799071.270472 It is an MX104 v21.1 R1.11 It doesnt appear to be service impacting but solarwinds ...
Hi, What model SPC that u used? SPC2 model have limitation IPSEC tunnel throughput. Thanks
While you can no longer get support for your Junos 14.x and 16.x network, you CAN upgrade to a supported Junos version.
Log in to see this information