Junos OS

Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

You can use "plain-text-password-value" instead of "plain-text-password" to avoid the interactive method. Take care with using plain-text passwords in files though! e.g. system { login { user $USER { class $CLASS; ...

Yes, this is the approach that Paragon Automation uses for some of its rules. e.g. https://github.com/Juniper/healthbot-rules/blob/master/juniper_official/Interfaces/check-lacp-statistics-openconfig.rule This is openconfig example and uses grpc ...

Hi Gavin Thank you for the suggestion. It is working now and I can run the ZTP. The only question left is how to configure user password from configuration file? Supplying plain-text password in the config file is not allowed, because it is interactive ...

Although mine aren't SRX, but, NG-RE's in MX, I recently did the USB upgrade from 17.4R2-S10 to 22.2R3-S2.8 and it was fine. I saved the config before, and put it back in after. MW is needed, as there is lots of downtime. Ask JTAC if SRX is ok to upgrade ...

Hello Fred, You can raise a TAC case requesting the release. They will provide a private link to you to download 19.4R3-S3. About USB upgrade: If you are doing USB upgrade, you need not follow the upgrade path. However, upgrade window in such ...

dup (cross post) of SRX300 sending malformed BGP OPEN messages, without marker, type and so on | Routing (juniper.net)