SRX Next-Gen Firewalls

I will certainly do what has been recommended. I realize I need to make some changes to my equipment. I use it as an intermediate device. It has use, and safety is a concern. Thx, Puluka ------------------------------ Adrian Aguinaga B.S.C.M. I.T.T. ...

Hello everyone, I'm currently working on monitoring the traffic exchanged with one of our clients using either SRX1500 or SRX550, both running software version 19.4. We're utilizing a VPLS connection for this communication. I'd like to implement a port ...

Hello, my SRX300 says that it boots from the backup partition: *********************************************************************** ** ** ** WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS IMAGE ** ** ** ** It is possible that the ...

Will two SRX directly connected be permanent or is this a staged replacement plan? For the two interfaces connected I see that the SRX300 is in trunk mode with two vlans assigned and the SRX550 is in access mode with 1 vlan (all that can be assigned). ...

Hi Team, I am having an awful lot of trouble setting up a NPS server to authenticate clients on the JSC. Does anyone have a standard set up for the NPS server for juniper, as the windows servers usually come with cisco inbuilt options. ...

Thx for you reply Mr. Spuluka . I have the following device setup. Gateway -> srx300(15.1X49-D60.7) -> srx550(12.1X46-D40.2) -> device(wifi) -> device(wifi media bridge) -> standard switch stack(rvi completes here but my locale ...

The irb interface does replace the RVI with vlan interfaces on newer devices like the SRX300 you have. The command structure for vlans changed on newer hardware and RVI id no longer used. Can you share the interfaces you are trying to get tagged and ...