SRX Next-Gen Firewalls

 View Only
last person joined: 9 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • Profile Picture

    SRX1500 Dynamic Application KRB5 and Windows PC's

    By: emmett brown , 9 hours ago

    I use this policy to allow users to authenticate in the Windows domain : policy MS_DYNAPP { match { source-address any; destination-address [ DC1 DC2 ]; dynamic-application [ junos:LDAP junos:CLDAP junos:NBNS junos:MSRPC ...

  • Profile Picture

    RE: Mirroring VPLS port on SRX

    By: spuluka , 14 hours ago

    I've only done vpls port mirrors on mx devices so not sure if it is supported on the SRX. But here is the kb on the setup. https://supportportal.juniper.net/s/article/MX-How-to-configure-Layer-2-VPLS-Port-Mirroring ------------------------------ ...

  • Profile Picture

    RE: RVI switching, on irb interface only

    By: eugene1973 , 18 hours ago

    I will certainly do what has been recommended. I realize I need to make some changes to my equipment. I use it as an intermediate device. It has use, and safety is a concern. Thx, Puluka ------------------------------ Adrian Aguinaga B.S.C.M. I.T.T. ...

  • Profile Picture

    Mirroring VPLS port on SRX

    By: ABDELHAMID SAIED , 20 hours ago

    Hello everyone, I'm currently working on monitoring the traffic exchanged with one of our clients using either SRX1500 or SRX550, both running software version 19.4. We're utilizing a VPLS connection for this communication. I'd like to implement a port ...

  • Profile Picture

    WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS ...

    By: Georg Pauwen , 20 hours ago

    Hello, my SRX300 says that it boots from the backup partition: *********************************************************************** ** ** ** WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS IMAGE ** ** ** ** It is possible that the ...

  • Profile Picture

    RE: RVI switching, on irb interface only

    By: spuluka , yesterday

    Will two SRX directly connected be permanent or is this a staged replacement plan? For the two interfaces connected I see that the SRX300 is in trunk mode with two vlans assigned and the SRX550 is in access mode with 1 vlan (all that can be assigned). ...

  • Profile Picture

    RE: WINDOWS NPS SERVER RADIUS AUTHENTICATION FROM IPSEC ...

    By: DAVID WILLIAMS , yesterday

    Hi Team, I am having an awful lot of trouble setting up a NPS server to authenticate clients on the JSC. Does anyone have a standard set up for the NPS server for juniper, as the windows servers usually come with cisco inbuilt options. ...

Unanswered Posts

  • SRX1500 Dynamic Application KRB5 and Windows PC's

  • WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS ...

  • RE: WINDOWS NPS SERVER RADIUS AUTHENTICATION FROM IPSEC ...

  • Qemu options for the vSRX in GNS3?

  • Can SRX300 be configured to block for accessing all ...

  • SRX300 upgraded to 22.4R3.25 - Web Login forever shows ...

  • KB21134 - [SRX] RMA replacement of a node in a Chassis ...

Top Contributors in the Community