SRX Next-Gen Firewalls

Hey Daryll, It's been a really long time since I've had to deal with ADSL, we are mostly fibre to the home here in NZ. Below is a snippet of the configuration I used to use on an old SRX110 back in the day. Note the "encapsulation atm-ppp-vc-mux", ...

Proxy arp is only needed when you are using an ip address that is NOT configured on the physical interface but is in the same subnet. For ip addresses configured on the interface the arp reply when that ip is used is part of the standard practice. ...

Good Afternoon!! In our organization, we currently use port forwarding to provide external access to printers at our geographically spread out sites. No S2S VPN's in use. This is fine when it's just one device, but I'm having some issues in setting ...

Issue is that I am trying to get a web server tunneled via gre to the internet using filter based routing and static NAT. From web-server all seems working. wget a site on the net uses the tunnel as expected, but when using telnet x.x.x.x 80 to the server ...

Hi All, I don't have IDP config in my template, could you suggest that another config should be removed in order to commit? output: # commit /var/db/idpd/sec-download/detector-capabilities.xml:4637: parser error : Char 0x0 out of allowed range ...

Hi, Do you know what version is it fixed in? Kind regards, Pawel Mazurkiewicz ------------------------------ Pawel Mazurkiewicz ------------------------------

Hi, If I'm understanding right, you have SNMP available on the untrust zone/interface of the SRX via host-inbound-traffic . You are trying to monitor the SRX from an external source. Not reach another device connected to the SRX via the same Security ...