Switching

That makes complete sense. Appreciated!! ------------------------------ Be kind!! ------------------------------

The filter above will deny all traffic to address 172.16.100.2/32. In filters once a match occurs all processing stops. So to allow icmp to 172.16.100.2/32 you would need an accept term just for icmp followed by the reject term above. ------------------------------ ...

Hi, Can you please share the filter configuration with the term to accept icmp? Regards ------------------------------ Sheetanshu Shekhar ------------------------------

Good morning, Let me help to answer your questions, 1) set system radius-server 1.1.1.1 secret test ( This one is to use Radius for authentication towards access (system authentication)of the devices itself) so instead of using a local "username" ...

Hi everyone, I noticed we can configure radius server in two places on EX SW. 1) set system radius-server 1.1.1.1 secret test 2) set access radius-server 1.1.1.1 secret test Can either of the two methods be used for radius configuration ? Or ...

Hello, I wrote a filter for a constraint as follows set interfaces ae0 unit 0 family inet filter input closedaccess set firewall family inet filter closedaccess term access from source-address 192.168.1.2/32 set firewall family inet ...

Thank you very much for your reply, Maitrya. I do agree that there may well be more than just static electrical characteristics that determine if a PSU combo is usable or not. I'm just curious as to why Juniper along with many other vendors cannot offer ...