Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Profile Picture

    Establish two BGP sessions with different ASNs on the ...

    By: jvidal , yesterday

    Hello, I currently have an unusual configuration with a peering point, and I need to establish two BGP sessions because we have two ASNs. This connection is made through a physical link where we have been asked to use two VLANs, each with a ...

  • Profile Picture

    RE: CoS on GRE Tunnel Interface?

    By: kronicklez , yesterday

    Hi all, Just to update from JTAC regarding my issue. After junos version 18.4 the feature can see each que on GR interface already disable. So no other way we can check traffic statistic entering the que on GR interface. Hopefully if someone here ...

  • Profile Picture

    RE: BGP Peer Priority Preference

    By: CHINGIZ MAMMADOV , 3 days ago

    Hi, Sorry for late response. The config is correct. It seems that uplink provider of your ISP1 is prefers it. Most providers apply higher local preference to their direct customers. So your prepend will not work in this case. Some provider offer to ...

  • Profile Picture

    Configuration of MPLS-TP (Transport Profile) via Static ...

    By: Anonymous , 3 days ago

    This message was posted by a user wishing to remain anonymous As is well know that in MPLS TP (Transport Profile) the control can be static or Dynamic. I am looking for sample configuration for MPLS-TP, where the configuration is done statically. ...

  • Profile Picture

    RE: BGP PIC core and FIB architecture on MX

    By: Olivier Benghozi , 9 days ago

    By the way, how much memory pressure does add preserve-nexthop-hierarchy on the FPCs memory? ------------------------------ Olivier Benghozi ------------------------------

  • Profile Picture

    RE: How many routing amount can Juniper MX480 rece ...

    By: spuluka , 11 days ago

    The routing and forwarding table sizes are not part of the public data sheet information. You will need to contact your reseller or sales engineer for these on an NDA basis but they are readily available via the channel. With the MX chassis series ...

  • Profile Picture

    RE: MX204 maximum IPv4 unicast routes

    By: spuluka , 11 days ago

    The routing and forwarding table sizes are not part of the public data sheet information. You will need to contact your reseller or sales engineer for these on an NDA basis but they are readily available via the channel. ------------------------------ ...

Announcements

  • AI-Driven Support via JSI

    Get AI-driven support by connecting your devices to Juniper Support Insights (JSI). Join one of our upcoming “Jumpstart JSI Ask the Experts” meetups to learn more about JSI and ask the panel of experts your questions. Select the session that best suits your schedule:

    Tuesday, June 25 from 8:00-8:45PM PT: Register Now
    Wednesday, June 26 from 8:00-8:45AM PT: Register Now

Unanswered Posts

  • Establish two BGP sessions with different ASNs on the ...

  • Configuration of MPLS-TP (Transport Profile) via Static ...

  • Translate ACX config to MX

  • OSPF Multi-area Adjacency

  • OSPF Adjacency Changes

  • Juniper equivalent for Cisco "encapsulation default" ...

  • Confused about Anycast SID behavior in SR MPLS :(

Top Contributors in the Community