Data Center

 View Only
last person joined: 5 days ago 

Ask questions and share experiences about Data Center Architecture and approaches.
  • 1.  Using 120v and 240v Mains to Power A QFX Chassis

    Posted 10-19-2021 12:28
    Hello,
    I can't find this info anywhere else, so I'll try it here.
    I currently have 3 QFX routers running dual PS powered by 120vac mains.
    I want to migrate the power from 120vac to 240vac without interrupting the service.
    My question is, can I move 1 PS at a time from 120vac to 240vac without causing problems?
    In other words, will the system support 2 power supplies powered by 2 different mains voltages?

    Thanks.

    ------------------------------
    Mark Rawson
    ------------------------------


  • 2.  RE: Using 120v and 240v Mains to Power A QFX Chassis

    Posted 10-19-2021 18:54
    I have not run QFX devices, but have been told NOT to do that mixed power input setup on MX and SRX devices.

    So I would assume it would be the same here.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------