SD-WAN

Hi Dustin,

Hope you are well.
I can see its an old post but are you able to provide some documents or learning material for deplyong 128T on EVEng please ?

Many thanks

Hi Dustin,

Hope you are well.
I can see its an old post but are you able to provide some documents or learning material for deplyong 128T on EVEng please ?

Many thanks

Mehdi, I know you will have fun using SSR in EVE-NG. There are just a couple things to keep in mind. You can follow these instructions and create your own Image for EVE. https://www.eve-ng.net/index.php/documentation/howtos/juniper-sdwan-128t/

NOTE: For Mist deployments, you should be using an ISO with "ibu" in the name.

For Virtual SSRs, you cannot scan a QR Code. Once, the SSR is booted, you can log in at the console with root/128tRoutes and then type "ip a". You see several network interfaces. Every couple of minutes type "ip a" again. You'll see a Bridge interface formed and then sub-interfaces added to the bridge, and finally, you will see a KNI interface. At this point you should be able to type "su admin" and then from the PCLI just type "adopt" (this only works on global01 – there is an expanded command for the other Mist instances). When you type adopt, you will be prompted to log into to Mist with your Mist user/pass, then select an Org you want to on-board the router to. Then give it a name and finally, hit "y" to start the router. Give it about 5 minutes and it will show up in your Mist org inventory. At this point, any remaining config is all done through the Mist GUI.

Please let me know if you have any additional questions.

-------------------------

If you are adopting to anything other than Global01, you will need to copy the registration code from your Org and then use the following command.

 adopt router-name {router-name} registration-code {registration-code}

 Replace the brackets with the proper values.

 ~Dustin

Hi Dustin,

Hope you are well.
I can see its an old post but are you able to provide some documents or learning material for deplyong 128T on EVEng please ?

Many thanks

Mehdi, I know you will have fun using SSR in EVE-NG. There are just a couple things to keep in mind. You can follow these instructions and create your own Image for EVE. https://www.eve-ng.net/index.php/documentation/howtos/juniper-sdwan-128t/

NOTE: For Mist deployments, you should be using an ISO with "ibu" in the name.

For Virtual SSRs, you cannot scan a QR Code. Once, the SSR is booted, you can log in at the console with root/128tRoutes and then type "ip a". You see several network interfaces. Every couple of minutes type "ip a" again. You'll see a Bridge interface formed and then sub-interfaces added to the bridge, and finally, you will see a KNI interface. At this point you should be able to type "su admin" and then from the PCLI just type "adopt" (this only works on global01 – there is an expanded command for the other Mist instances). When you type adopt, you will be prompted to log into to Mist with your Mist user/pass, then select an Org you want to on-board the router to. Then give it a name and finally, hit "y" to start the router. Give it about 5 minutes and it will show up in your Mist org inventory. At this point, any remaining config is all done through the Mist GUI.

Please let me know if you have any additional questions.

-------------------------

If you are adopting to anything other than Global01, you will need to copy the registration code from your Org and then use the following command.

 adopt router-name {router-name} registration-code {registration-code}

 Replace the brackets with the proper values.

 ~Dustin

Hi Dustin,

Hope you are well.
I can see its an old post but are you able to provide some documents or learning material for deplyong 128T on EVEng please ?

Many thanks