Hi All,
Am trying to create a simple L2TPv3 test setup with 2 vMX. I have configured(hopefully) the necessary L2TPv3 configurations between the vMXs but when I try to test it using "test services l2tp tunnel ..." it fails with subscriber authentication. "show subscribers" does not show anything. How do I configure static subscribers to test mt L2TPv3 sessions? I assume just to verify the L2TPv3 controlplane I don't need traffic from subscribers (i.e the above test command).
Here's my relevant configurations. Please let me know what is missing.
root# show system services static-subscribers
access-profile {
test-user;
}
dynamic-profile {
junos-default-profile;
}
authentication {
password "$9$69vD/u1SyK8xdev4aGUHkuOB"; ## SECRET-DATA
username-include {
user-prefix test;
}
}
group test {
interface demux0.1;
}
root# show interfaces demux0
unit 1 {
demux-options {
underlying-interface ge-0/0/1.1;
}
family inet {
demux-source {
192.168.1.2/30;
17.0.0.2/24;
}
address 192.168.1.1/30;
address 17.0.0.1/24;
}
}
[edit]
root# show interfaces ge-0/0/1
flexible-vlan-tagging;
unit 1 {
demux-source inet;
vlan-tags outer 10 inner 110;
family inet {
unnumbered-address lo0.0;
}
}
[edit]
root# show interfaces lo0
unit 0 {
family inet {
address 3.3.3.1/24;
}
}
root# show access
profile test-user {
accounting-order radius;
authentication-order radius;
radius {
authentication-server 10.10.10.90;
accounting-server 10.10.10.90;
options {
client-authentication-algorithm round-robin;
client-accounting-algorithm round-robin;
juniper-dsl-attributes;
}
}
radius-server {
10.10.10.90 {
port 1812;
accounting-port 1813;
secret "$9$L0JXVYJZjqPQDiCt0OREVws"; ## SECRET-DATA
source-address 10.10.10.91;
}
}
accounting {
order radius;
}
}
Thank you,
regards,
Ram
------------------------------
Ramkumar Ganapathysubramanian
------------------------------