Switching

 View Only
last person joined: 3 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  Trunk port between EX3400 to Cisco 3750X

    Posted 09-14-2022 05:06
    Need to connect a Juniper EX3400 to a Cisco 3750X.  New to Juniper and would like info or port configs for both sides.

    Thanks

    ------------------------------
    STEPHEN BAUER
    ------------------------------


  • 2.  RE: Trunk port between EX3400 to Cisco 3750X

    Posted 09-14-2022 06:51
    The Juniper side of a trunk port would require
    • Create all the vlans that will be included
    • Setting the interface to ethernet switching trunk mode
    • add the vlans via one of two options 
      • Option 1- add the interface to the vlan statement
      • Option 2 - add the vlans to the interface configuration

    Full details of configuration and explanations are here
    https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/topic-map/layer-2-understanding.html#id-using-the-enhanced-layer-2-software-cli

    Since you are new to Juniper you might find these free training resources helpful.
    https://learningportal.juniper.net/juniper/user_activity_info.aspx?id=JUNIPER-OPEN-LEARNING&TrackId=jnet-nav

    Starting with this free introduction to the Junos CLI
    https://learningportal.juniper.net/juniper/user_activity_info.aspx?id=EDU-JUN-WBT-JOL-JNCIA-JUNOS

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------