I am really stuck. Need to fix this to keep my labbing going. Here's the problem,
vSRX1 and 2 are directly connected on ge-0/0/0 (unit 0). IPs on same subnet, OSPF and Firewall configuration look good to me. But still they don't see each other.
root@vSRX1# run show interfaces ge-0/0/0.0
Logical interface ge-0/0/0.0 (Index 71) (SNMP ifIndex 524)
Flags: Up SNMP-Traps 0x4004000 Encapsulation: ENET2
Input packets : 0
Output packets: 2872
Security: Zone: trust
Allowed host-inbound traffic : bootp bfd bgp dns dvmrp igmp ldp msdp nhrp
ospf ospf3 pgm pim rip ripng router-discovery rsvp sap vrrp dhcp finger ftp
tftp ident-reset http https ike netconf ping reverse-telnet reverse-ssh
rlogin rpm rsh snmp snmp-trap ssh telnet traceroute xnm-clear-text xnm-ssl
lsping ntp sip dhcpv6 r2cp webapi-clear-text webapi-ssl tcp-encap
sdwan-appqoe high-availability
Protocol inet, MTU: 1500
Max nh cache: 100000, New hold nh limit: 100000, Curr nh cnt: 0,
Curr new hold cnt: 0, NH drop cnt: 0
Flags: Sendbcast-pkt-to-re, Is-Primary
Addresses, Flags: Is-Preferred Is-Primary
Destination: 12.0.0/24, Local: 12.0.0.1, Broadcast: 12.0.0.255
[edit]
root@vSRX1#
root@vSRX2# run show interfaces ge-0/0/0.0
Logical interface ge-0/0/0.0 (Index 71) (SNMP ifIndex 524)
Flags: Up SNMP-Traps 0x4004000 Encapsulation: ENET2
Input packets : 0
Output packets: 2865
Security: Zone: trust
Allowed host-inbound traffic : bootp bfd bgp dns dvmrp igmp ldp msdp nhrp
ospf ospf3 pgm pim rip ripng router-discovery rsvp sap vrrp dhcp finger ftp
tftp ident-reset http https ike netconf ping reverse-telnet reverse-ssh
rlogin rpm rsh snmp snmp-trap ssh telnet traceroute xnm-clear-text xnm-ssl
lsping ntp sip dhcpv6 r2cp webapi-clear-text webapi-ssl tcp-encap
sdwan-appqoe high-availability
Protocol inet, MTU: 1500
Max nh cache: 100000, New hold nh limit: 100000, Curr nh cnt: 0,
Curr new hold cnt: 0, NH drop cnt: 0
Flags: Sendbcast-pkt-to-re, Is-Primary
Addresses, Flags: Is-Preferred Is-Primary
Destination: 12.0.0/24, Local: 12.0.0.2, Broadcast: 12.0.0.255
[edit]
root@vSRX2#
root@vSRX1# run show configuration | display set
set version 21.2R1.10
set system host-name vSRX1
set system root-authentication encrypted-password "$6$iMrBL1eu$Mhw62RDF8pzXKB0irdaL54odMleWP0zgUN0R0oj8uM3rPLwf.KnUUl/.IDRnjWVYEfX7jBkRWtPteiwrKC2Da1"
set system services ssh
set system services web-management http interface fxp0.0
set system services web-management https system-generated-certificate
set system services web-management https interface fxp0.0
set system syslog file interactive-commands interactive-commands any
set system syslog file messages any any
set system syslog file messages authorization info
set system license autoupdate url
https://ae1.juniper.net/junos/key_retrievalset security forwarding-options family inet6 mode packet-based
set security forwarding-options family mpls mode packet-based
set security forwarding-options family iso mode packet-based
set security zones security-zone trust tcp-rst
set security zones security-zone trust host-inbound-traffic system-services all
set security zones security-zone trust host-inbound-traffic protocols all
set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services all
set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic protocols all
set interfaces ge-0/0/0 unit 0 family inet address 12.0.0.1/24
set interfaces fxp0 unit 0
set interfaces lo0 unit 0 family inet address 1.1.1.1/32
set protocols ospf area 0.0.0.0 interface ge-0/0/0.0
set protocols ospf area 0.0.0.0 interface lo0.0 passive
set routing-options router-id 1.1.1.1
[edit]
root@vSRX1#
root@vSRX2# run show configuration | display set
set version 21.2R1.10
set system host-name vSRX2
set system root-authentication encrypted-password "$6$gApZnHVL$.w3HPuIEL9K5AQTyHS0rggi4.k5AJxv.5VNRHa8T787.mRXl13P9wb6BhprfeCm3oqkS7BThYcATkTWWQ0Hjt0"
set system services ssh
set system services web-management http interface fxp0.0
set system services web-management https system-generated-certificate
set system services web-management https interface fxp0.0
set system syslog file interactive-commands interactive-commands any
set system syslog file messages any any
set system syslog file messages authorization info
set system license autoupdate url
https://ae1.juniper.net/junos/key_retrievalset security forwarding-options family inet6 mode packet-based
set security forwarding-options family mpls mode packet-based
set security forwarding-options family iso mode packet-based
set security zones security-zone trust tcp-rst
set security zones security-zone trust host-inbound-traffic system-services all
set security zones security-zone trust host-inbound-traffic protocols all
set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services all
set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic protocols all
set interfaces ge-0/0/0 unit 0 family inet address 12.0.0.2/24
set interfaces fxp0 unit 0
set interfaces lo0 unit 0 family inet address 2.2.2.2/32
set protocols ospf area 0.0.0.0 interface ge-0/0/0.0
set protocols ospf area 0.0.0.0 interface lo0.0 passive
set routing-options router-id 2.2.2.2
[edit]
root@vSRX2#
Please help!!!
------------------------------
SENTHILKUMAR MURUGESAN
------------------------------