Hi!
I have a problem with the DHCPv6 over PPPoE.
When the session is created the DHCP assign the same network twice.
This is the dynamic profile:
set dynamic-profiles dyn-pppoe routing-instances "$junos-routing-instance" interface "$junos-interface-name" any
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" no-traps
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" ppp-options pap
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" pppoe-options underlying-interface "$junos-underlying-interface"
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" pppoe-options server
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" keepalives interval 30
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" family inet filter input "$junos-input-filter"
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" family inet filter input precedence 255
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" family inet filter output "$junos-output-filter"
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" family inet filter output precedence 255
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" family inet unnumbered-address lo0.0
set dynamic-profiles dyn-pppoe interfaces pp0 unit "$junos-interface-unit" family inet6 address $junos-ipv6-address
set dynamic-profiles dyn-pppoe protocols router-advertisement interface "$junos-interface-name" other-stateful-configuration
set dynamic-profiles dyn-pppoe protocols router-advertisement interface "$junos-interface-name" prefix $junos-ipv6-ndra-prefix
Any clue to fix this issue?
Thanks in advance!
------------------------------
MARCOS PYTEL
------------------------------