Junos OS

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about Junos OS.
  • 1.  SRX340 - cl-2/0/0 - Admin Down.

     
    Posted 04-20-2022 13:38
    Hi,
    The cl-2/0/0 interface showing admin down, though it is not disable on config level.

    is there a command  to disable / enable under pfe mode. (> start shell pfe network fwdd)


    admin@xxx-fw1> show interfaces cl-2/0/0
    Physical interface: cl-2/0/0, Administratively down, Physical link is Up
    Interface index: 161, SNMP ifIndex: 555
    Type: LTE, Link-level type: Ethernet, MTU: 1504, Speed: LTE MODEM
    Device flags : Present Running
    Interface flags: Admin-Test Link-Layer-Down Point-To-Point SNMP-Traps Internal: 0x0

    admin@xxx-fw1> show configuration interfaces cl-2/0/0
    dialer-options {
    pool 1 priority 100;
    }
    act-sim 1;
    cellular-options {
    sim 1 {
    radio-access automatic;
    }
    sim 2 {
    radio-access lte-only;
    }
    }



    ------------------------------
    Regards,
    Bharath
    ------------------------------


  • 2.  RE: SRX340 - cl-2/0/0 - Admin Down.

    Posted 04-21-2022 06:42
    Looks like your configuration is not complete and also should be at the unit level and not at the base interface per the example here.

    https://www.juniper.net/documentation/us/en/hardware/srx300-srx550-hm/topics/topic-map/mpim-lte.html

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------