I am assigning an IP address to the lo0 interface:
# show interfaces lo0
unit 0 {
address 127.0.0.1/32;
address 10.0.0.2/24;
}
}
# show interfaces irb
unit 1000 {
family inet {
address 10.0.0.1/24;
}
}
# show vlans
main_vlan {
vlan-id 1000;
l3-interface irb.1000;
}
# show interface xe-0/0/47
xe-0/0/47 {
unit 0 {
family ethernet-switching {
vlan {
members main_vlan;
}
}
}
}
I am able to ping 10.0.0.1 and 10.0.0.2 on the switch itself.
From remote devices, I can ping 10.0.0.1, but not 10.0.0.2 (ARP resolution fails).
What could be causing this behavior?