Hi,
Thanks for your answer. I deleted it, but unfortunately it almost the same.
I got 100% packet loss for every device ping. Only the irb interface self ping works.
Ethernet switching table is empty.
Other logs seem to be fine for me.
root@vqfx-re> show ethernet-switching global-information
Global Configuration:
MAC aging interval : 300
MAC learning : Enabled
MAC statistics : Disabled
MAC limit Count : 393215
MAC limit hit : Disabled
MAC packet action drop: Disabled
MAC+IP aging interval : IPv4 - 1200 seconds
IPv6 - 1200 seconds
MAC+IP limit Count : 393215
MAC+IP limit reached : No
LE aging time : 1200
LE VLAN aging time : 1200
RE state : Master
VXLAN Overlay load bal: Disabled
{master:1}
root@vqfx-re> show ethernet-switching statistics
Local interface: xe-1/0/1.0, Index: 558
Multicast packets: 0
Multicast bytes : 0
Flooded packets : 0
Flooded bytes : 0
Current MAC count: 0 (Limit 8192)
Local interface: xe-1/0/0.0, Index: 556
Multicast packets: 0
Multicast bytes : 0
Flooded packets : 0
Flooded bytes : 0
Current MAC count: 0 (Limit 8192)
{master:1}
root@vqfx-re> show ethernet-switching interface
Routing Instance Name : default-switch
Logical Interface flags (DL - disable learning, AD - packet action drop,
LH - MAC limit hit, DN - interface down,
MMAS - Mac-move action shutdown, AS - Autostate-exclude enabled,
SCTL - shutdown by Storm-control, MI - MAC+IP limit hit)
Logical Vlan TAG MAC MAC+IP STP Logical Tagging
interface members limit limit state interface flags
xe-1/0/0.0 8192 8192 tagged
employee-vlan 100 1024 1024 Forwarding tagged
Routing Instance Name : default-switch
Logical Interface flags (DL - disable learning, AD - packet action drop,
LH - MAC limit hit, DN - interface down,
MMAS - Mac-move action shutdown, AS - Autostate-exclude enabled,
SCTL - shutdown by Storm-control, MI - MAC+IP limit hit)
Logical Vlan TAG MAC MAC+IP STP Logical Tagging
interface members limit limit state interface flags
xe-1/0/1.0 8192 8192 tagged
employee-vlan 100 1024 1024 Forwarding tagged
{master:1}
root@vqfx-re> show ethernet-switching instance
Information for routing instance and VLAN:
Flags (DL - disable learning, SE - stats enabled,
AD - packet action drop, LH - MAC limit hit,
MI - mac+ip limit hit)
Inst Logical Routing VLAN Index IRB Flags Tag
type system instance index
RTT Default default-switch 5
vlan Default default-switch default 2 1
vlan Default default-switch employee-vlan 3 547 100
------------------------------
BALAZS KISS
------------------------------
Original Message:
Sent: 04-13-2022 12:50
From: Unknown User
Subject: Layer 2 switching on vQFX switch
Hi,
Please delete this "set interfaces vlan unit 0 family inet address 100.100.100.1/24"
Thanks
Original Message:
Sent: 04-13-2022 07:02
From: BALAZS KISS
Subject: Layer 2 switching on vQFX switch
Hi all,
I`ve just started to learn junos a few weeks ago, so please forgive me if my question is too nooby.
I tried to set up a basic lab in eve-ng to practice. Everything works as I expected, except the switch. I`m unable to ping the hosts over the switch, ping the router from the switch, ping the switch itself from any other devices. I followed several guide from the knowledge base and nothing helped. I always get an error message: host unreachable.
Here is my configuration:
set interfaces xe-1/0/0 vlan-tagging
set interfaces xe-1/0/0 native-vlan-id 1
set interfaces xe-1/0/0 encapsulation extended-vlan-bridge
set interfaces xe-1/0/0 unit 0 family ethernet-switching interface-mode trunk
set interfaces xe-1/0/0 unit 0 family ethernet-switching vlan members employee-vlan
set interfaces xe-1/0/1 vlan-tagging
set interfaces xe-1/0/1 native-vlan-id 1
set interfaces xe-1/0/1 encapsulation extended-vlan-bridge
set interfaces xe-1/0/1 unit 0 family ethernet-switching interface-mode trunk
set interfaces xe-1/0/1 unit 0 family ethernet-switching vlan members employee-vlan
set interfaces em0 unit 0 family inet dhcp
set interfaces em1 unit 0 family inet address 169.254.0.2/24
set interfaces irb unit 0 family inet address 100.100.100.1/24
set interfaces vlan unit 0 family inet address 100.100.100.1/24
set forwarding-options storm-control-profiles default all
set protocols igmp-snooping vlan default
set vlans default vlan-id 1
set vlans employee-vlan vlan-id 100
set vlans employee-vlan l3-interface irb.0
Can you tell me what I missed?
Thanks for your help!
------------------------------
BALAZS KISS
------------------------------