hi
I've configured POE power limit on my EX2300 switch, but it doesn't seem to be applied.
my Junos version is 19.4R3.11.
ive executed the command "set poe interface all maximum-power 15.4"
but it doesn't seem to affect the power allocation on the switch, see "show poe int" output below.
any idea what im missing here?
appreciate any tips or comments.
thanks
root@JYou# run show poe interface
Interface Admin Oper Pair/Mode Max Priority Power Class
status status status power consumption
ge-0/0/0 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
ge-0/0/1 Enabled ON 2P/AT 30.0W Low 3.0W 4
ge-0/0/2 Enabled ON 2P/AT 30.0W Low 3.0W 4
ge-0/0/3 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
ge-0/0/4 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
ge-0/0/5 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
ge-0/0/6 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
ge-0/0/7 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
------------------------------
AHIYA ZADOK
------------------------------