Hello,
We use Ansible and Napalm to automate our configuration process.
It works well with many devices but we have an issue with QFX5200-48y.
When we change the channel speed it leads to a "warning". This is the expected
behaviour.
root@5200-1# set system name-server 1.1.1.1
root@5200-1# show | compare
warning: 25g config will be applied to ports 0 to 3
[edit system]
+ name-server {
+ 1.1.1.1;
+ }
Unfortunatly it breaks our automated process (Ansible and Napalm).
For instance. When trying to deploy a piece of configuration using Ansible we have the following message.
TASK [Deploy DNS configuration] ***************************************************************************************************************************************************************************
fatal: [qfx5200-15]: FAILED! => {"changed": false, "msg": "Failure diffing the configuraton: RpcError(severity: warning, bad_element: None, message: warning: 25g config will be applied to ports 0 to 3)"}
Is there any way to prevent the QFX from warning or to prevent Ansible/Napalm/Netconf from failing after a simple "warning"?
Thank you for your help
Best regards
Vincent