Routing

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  Pushing Broadcasts through the SRX 345 - verify?

    Posted 02-27-2022 07:52
    Hello,

    This is a different issue to the SIP issue I just posted. but same SRX 345
    need to push a Broadcast from the Outside to the device outside. The Device only broadcast looking for the connection. It needs to go through the SRX345
    We tried to setup an IP redistribution. I think its a Target-broadcast in the Juniper.
    I'm not seeing any denies on the SRX345. But want to confirm its goring through.
    Is there a way to setup specific logging to see successful traffic that I want to verify is making its way in/to the SRX and out the other side?

    Thank you

    ------------------------------
    DAVID JOHNSTON
    ------------------------------


  • 2.  RE: Pushing Broadcasts through the SRX 345 - verify?

    Posted 03-16-2022 19:16
    Broadcast will not go through any IP device that's it broadcast is limited to a segment, network, vlan, etc. what you could see is if the interfaces is being hitted by broadcast traffic using "show interface ge-0/0/0 extensive" command 

    Luis Flor

    ------------------------------
    LUIS W FLOR GONZA
    ------------------------------