Routing

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

Flow Monitoring with cflowd v5

  • 1.  Flow Monitoring with cflowd v5

    Posted 04-26-2022 05:28
    Edited by Michael Pappas 04-26-2022 09:23
    Hello!

    I need to configure cflowd version 5 monitoring on MX480 routers and send flow data to an external collector. The router has MPC7e line cards and two REs (model RE-S-2X00x6) but we don't have any service cards. I took a look at documentation but found lots of confusing info as there are inline/active/passive methods each with different limitations and requirements. so I didn't manage to decide on what method should I use on the device. 
    As far as I know the in passive mode the port/card cannot participate in routing, so this option can be ignored cause we need routing and monitoring at the same time. 
    I would appreciate any suggestion on this.

    regards.

    ------------------------------
    TAYMAZ MOHSENZADEH
    ------------------------------