Switching

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  Trunking between 2 EX2300

    Posted 05-16-2022 05:25
    Edited by spuluka 05-16-2022 06:03


    Hello. I am new to juniper switch programming and I need help connecting the Vlans of the two ex2300 switches I have. I have followed several tutorials, but surely I am doing something wrong, since I can't get it to work.
    I have created the 2 vlans with Id-100 and id-200 (the same in both switches) and I have assigned them to the ports that appear in the image, in addition to the two ports that are in trunk mode, but I can't get it to work , since when I connect a computer to port 2 of switch 1 and connect another to port 2 of switch 2, it does not respond to ping

    Connecting the computers to the same switch does work and they respond to ping when they are in the same vlan, so I guess the fault has to be in the configuration of the trunk ports.

    Excuse my English, I use google translator.


  • 2.  RE: Trunking between 2 EX2300

    Posted 05-16-2022 06:06
    The basic configuration would be as follows.
    set interfaces ge-0/0/1 unit 0 family ethernet-switching interface-mode trunk
    
    set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan members vlan1
    set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan members vlan2​


    the labels vlan1 and vlan2 need to match what you have called the vlans under the vlan section.

    set vlans vlan1 vlan-id 1
    set vlans vlan2 vlan-id 2



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: Trunking between 2 EX2300

    Posted 05-16-2022 07:30

    Thanks for your reply.
    This is how I did it before but on ge-0/0/0 but it still doesn't work (Is it necessary to be on interface ge-0/0/1?).
    I enclose the code that appears when I use the "show interfaces" command

    Grupo1 is vlan1 with id- 100
    Grupo2 is vlan2 with id-200

    Both switches are configured the same.



    root# show interfaces
    ge-0/0/0 {
        unit 0 {
            family ethernet-switching {
                interface-mode trunk;
                vlan {
                    members [ Grupo1 Grupo2 ];
                }
                storm-control default;
            }
        }
    }
    ge-0/0/1 {
        unit 0 {
            family ethernet-switching {
                vlan {
                    members Grupo1;
                }
                storm-control default;
            }
        }
    }
    ge-0/0/2 {
        unit 0 {
            family ethernet-switching {
                vlan {
                    members Grupo1;
                }
                storm-control default;
            }
        }
    }
    ge-0/0/3 {
        unit 0 {
            family ethernet-switching {
                vlan {
                    members Grupo1;
                }
                storm-control default;
            }
        }
    }
    ge-0/0/4 {
        unit 0 {
            family ethernet-switching {
                vlan {
                    members Grupo2;
                }
                storm-control default;
            }
        }
    }
    ge-0/0/5 {
        unit 0 {
            family ethernet-switching {
                vlan {
                    members Grupo2;
                }
                storm-control default;
            }
    

     



    ------------------------------
    ADRIAN FERNANDEZ MANUEL
    ------------------------------



  • 4.  RE: Trunking between 2 EX2300

    Posted 05-16-2022 07:32
    That all looks correct.  Please supply the vlan configuration too.
    vlans Grupo1​
    vlans Grupo2


    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 5.  RE: Trunking between 2 EX2300

    Posted 05-16-2022 07:58
    Are you referring to the "Set vlans" command?

    Attached is a summary of the Vlans configuration
    .
    root# show vlans
    Grupo1 {
        vlan-id 100;
    }
    Grupo2 {
        vlan-id 200;
    }
    default {
        vlan-id 1;
        l3-interface irb.0;
    }
    ​

    I don't know what could be wrong. I've followed different tutorials, including the one on juniper website, but I can't get it to work.



    ------------------------------
    ADRIAN FERNANDEZ MANUEL
    ------------------------------



  • 6.  RE: Trunking between 2 EX2300

    Posted 05-16-2022 08:04
    There is a mismatch between the configurations and your visual port assignments in the first post.

    ge-0/0/0 is the physical top port which your diagram shows to be red vlan 1

    the port counting starts with 0 and goes top to bottom and left to right.

    Thus the trunk port is ge-0/0/1 in you physical diagram

    red vlan 1
    ge-0/0/0
    ge-0/0/2
    ge-0/0/3

    blue vlan 2
    ge-0/0/4
    ge-0/0/5
    ge-0/0/6
    ge-0/0/7

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 7.  RE: Trunking between 2 EX2300

    Posted 05-16-2022 09:04
    You are right. I just checked and it works. I had been trying to solve the problem for 3 weeks and in the end it was my mistake. I thought ports were read from bottom to top. Thank you very much for your help.

    ------------------------------
    ADRIAN FERNANDEZ MANUEL
    ------------------------------