SRX

 View Only
last person joined: 12 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  SRX550HM

    Posted 03-01-2022 22:02
    Hi Team,

    I have a single SRX550HM running on slot 6 " 2x 10G xPIM"

    The 10G interface does not come up. Is there a global coffin that I am missing?


    root@CFSE-Data-Center-CENTRAL-SRX550HM> show version 

    Hostname: CFSE-Data-Center-CENTRAL-SRX550HM

    Model: srx550m

    Junos: 21.4R1.12

    JUNOS Software Release [21.4R1.12]

    root@CFSE-Data-Center-CENTRAL-SRX550HM> show chassis hardware 

    Hardware inventory:

    Item             Version  Part number  Serial number     Description

    Chassis                                DA1916AK0168      SRX550M

    Midplane         REV 08   750-063950   ACNT2683         

    Routing Engine   REV 06   711-062269   ACNW9473          RE-SRX550M

    FPC 0                     BUILTIN      BUILTIN           FPC

      PIC 0                                                  6x GE, 4x GE SFP Base PIC

    FPC 6            REV 13   750-030454   ACLZ3851          FPC

      PIC 0                                                  2x 10G xPIM

    Power Supply 0   Rev 04   740-024283   AC86336           PS 645W AC

    Power Supply 1   Rev 04   740-024283   AA83049           PS 645W AC

    root@CFSE-Data-Center-CENTRAL-SRX550HM> show chassis cluster status    

    error: Chassis cluster is not enabled.

    root@CFSE-Data-Center-CENTRAL-SRX550HM> ...tions | match xe-6/0/0            

    xe-6/0/0        up    down MPLS_PTP_TO_PDA15_EX

    root@CFSE-Data-Center-CENTRAL-SRX550HM> ...rfaces xe-6/0/0 | display set     

    set interfaces xe-6/0/0 description MPLS_PTP_TO_PDA15_EX

    set interfaces xe-6/0/0 enable

    set interfaces xe-6/0/0 vlan-tagging

    set interfaces xe-6/0/0 speed 10g

    set interfaces xe-6/0/0 mtu 1552

    set interfaces xe-6/0/0 media-type fiber

    set interfaces xe-6/0/0 unit 2028 vlan-id 2028

    set interfaces xe-6/0/0 unit 2028 family inet address 192.168.91.57/30

    set interfaces xe-6/0/0 unit 2028 family mpls


    Thanks for the help 

    Pete

    ------------------------------
    PETE CASTILLO
    ------------------------------


  • 2.  RE: SRX550HM

     
    Posted 03-02-2022 05:38
    Your chassis hardware output does not appear to show any installed or functioning transceivers.


  • 3.  RE: SRX550HM

    Posted 03-03-2022 05:23
    I agree. I tried those transceivers on another device and they show up. I tried 3rd party and Juniper.

    Do you have a cli that I can try and share?

    Thanks,



    ------------------------------
    PETE CASTILLO
    ------------------------------



  • 4.  RE: SRX550HM

    Posted 03-03-2022 05:24
    Do you know if the JUNIPER 750-030454 2-Port 10 Gigabit Ethernet XPIM is supported on the SRX 550HM

    ------------------------------
    PETE CASTILLO
    ------------------------------



  • 5.  RE: SRX550HM

    Posted 03-03-2022 05:28
    Good call, I don't see this module on the interface card list.  In fact, no XE modules seem there at all.

    https://www.juniper.net/us/en/products/security/srx-series/srx550m-services-gateway-datasheet.html

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 6.  RE: SRX550HM

     
    Posted 03-03-2022 09:24
    According to the hardware guide, 10GB XPIM's are supported:

    https://www.juniper.net/documentation/us/en/hardware/srx550-hm/srx550-hm.pdf

    To start you could check if the FPC is online: show chassis fpc pic-status



  • 7.  RE: SRX550HM

    Posted 03-05-2022 06:40
    The 10G module is only supported under JunOS 12.x. Newer versions of JunOS will not enable the module.