SRX

 View Only
last person joined: 13 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  Static route SRX -> Cisco - unable to ping

    This message was posted by a user wishing to remain anonymous
    Posted 03-23-2022 09:22
    This message was posted by a user wishing to remain anonymous

    hi guys

    i am setting up a simple network static routes between an SRX and Cisco routers.
    for some reason I am unable to reach the host on the SRX side via static routes from Cisco,  but can see routes  from the Cisco router's routing table. 
    SRX ping to static routes pointing Cisco router works are all fine with no issue. 

    -ive put the interfaces to same routing-instance and same zone
    -have allowed host-inbound-traffic all, ping, protocols on both interfaces 

    not sure what else im missing - seems a simple straight forward set-up but  not working : / 







  • 2.  RE: Static route SRX -> Cisco - unable to ping

    Posted 03-30-2022 05:54
    Are you running the ping with the routing instance specified?
    By default ping alone will source from the base or root routing instance which will not have reachability.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------