Glad that you solved it :)
One thing regarding the vQFX and EVE-NG:
Make sure to use 17.4 as of this release works really well in terms of EVPN and the vQFX.
18.x and 19.x seem to have "strange side-effects" which sometimes results in either traffic-loss or one device thinking it's a VC-Member (which breaks the vQFX since it can't do VC).
BR
Christian
------------------------------
Christian Scholz
Juniper Networks Ambassador | JNCIE-SEC #374
Mail:
chs@ip4.deBlog: jncie.eu | Twitter: @chsjuniper | YT-Channel: netchron
------------------------------
Original Message:
Sent: 01-14-2021 10:19
From: Unknown User
Subject: Intervlan Routing on VQFX
Solved the issue. There was interface speed mismatch between host and qfx
Original Message:
Sent: 01-13-2021 08:49
From: Unknown User
Subject: Intervlan Routing on VQFX
Hey guys,
I want to configure intervlan routing using IRB interfaces on vQFX. I saw the lab design as follow on juniper vlabs page and I tried that design in my EVE VM.
I configured the same design and configuration with the one on Juniper vlabs. The problem is that even though configurations are the same, I can ping both IRB interfaces but I can
t ping between hosts. I can easily ping them when I tried with Juniper Vlab. I tried to troubleshoot but can't figure out what is wrong. I hope you guys can help me.
Thanks in advance.