Ask the Expert

  • 1.  L2VPN Draft Martini on MX Series

    Posted 01-09-2021 06:20
    Hi
    Browsing Feature Explorer I could not find support for L2VPN(Martini, compatible with Cisco Implementation for P2P L2VPN with VC type#4 VLAN support ) with this configuration on MX960.
    1- Is this configuration supported on MX Series?
    2- Is there any limitation on Supported MPCs?

    set protocols l2circuit neighbor 10.241.252.55 interface ae1.695 virtual-circuit-id 695
    set protocols l2circuit neighbor 10.241.252.55 interface ae1.695 no-control-word
    set protocols l2circuit neighbor 10.241.252.55 interface ae1.695 mtu 1500
    set protocols l2circuit neighbor 10.241.252.70 interface ae1.625 virtual-circuit-id 625
    set protocols l2circuit neighbor 10.241.252.70 interface ae1.625 no-control-word
    set protocols l2circuit neighbor 10.241.252.70 interface ae1.625 mtu 1500

    The above configuration was captured from a M320 Router
    Thank you
    Alireza

    ------------------------------
    Ali Soltan
    ------------------------------


  • 2.  RE: L2VPN Draft Martini on MX Series

    Posted 01-10-2021 07:47
    Hi
    Would you please help me in this regard?
    Thank you

    ------------------------------
    Ali Soltan
    ------------------------------



  • 3.  RE: L2VPN Draft Martini on MX Series

    Posted 01-10-2021 13:08
    Yes, the configuration is support on mx for all mpc types.  I've used it extensively and interop with Nokia as well.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------