Ask the Expert

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

ex4200 second fiber is not detected

  • 1.  ex4200 second fiber is not detected

    Posted 05-03-2021 05:39
    Hello,
    we have a ex4200 but the second 10g port is not detected and working, here is my VC output :
    show virtual-chassis vc-port
    fpc0:
    --------------------------------------------------------------------------
    Interface Type Trunk Status Speed Neighbor
    or ID (mbps) ID Interface
    PIC / Port
    vcp-0 Dedicated 1 Down 32000
    vcp-1 Dedicated 2 Down 32000


    show interfaces xe-0/1/2
    error: device xe-0/1/2 not found

    i have also set second 10g as vc  port but it shows absent and here is output
    how virtual-chassis vc-port
    fpc0:
    --------------------------------------------------------------------------
    Interface Type Trunk Status Speed Neighbor
    or ID (mbps) ID Interface
    PIC / Port
    vcp-0 Dedicated 1 Down 32000
    vcp-1 Dedicated 2 Down 32000
    1/1 Configured Absent
    1/2 Configured Absent
    1/3 Configured Absent


    any idea how to solve this?
    thank you.