Community Talk

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  Port channel with sub interface config on MX

    Posted 04-04-2015 21:18

    Hi,

    I am new to the JunOS platform and I wanted to create a port channel with sub interface on a MX 480 router.

     

    I have a logical system and I want the port channel sub interface to be part of the logical system with an encap of vlan id 50 and ip of 10.10.10.2/30 . I am not sure of how the cli's are as I a coming from the Cisco world 😞

     

    Also the other side of the port channel is on a Palo alto firewall which also has an ae configured with a sub interface configured for vlan 50.

     

    Appreciate your help.

     

    Thanks,

     

    Geo

     

     



  • 2.  RE: Port channel with sub interface config on MX
    Best Answer

     
    Posted 04-05-2015 02:29

    Hi,

     

    You need to allow the system to have aggregated-devices:

     

    set chassis aggregated-devices ethernet device-count 1

    ( if you need more devices change the number to the devices you need)

     

    Next step is to put the interfaces you want to you in the ae bundle:  ( you can add to upto 8 interfaces in an ae Bundle)

     

    set interfaces ge-0/1/0 description "ge-0/1/0 <---> ge-1/0/0.otherdevice"
    set interfaces ge-0/1/0 ether-options 802.3ad ae0

     

    set interfaces ge-0/2/0 description "ge-0/2/0 <---> ge-2/0/0.otherdevice"
    set interfaces ge-0/2/0 ether-options 802.3ad ae0

     

    #Configure the ae0 interface (bundled ae device)

    set interfaces ae0 description "ae0.mx <---> aeX.otherdice"
    set interfaces ae0 aggregated-ether-options link-speed 1g
    set interfaces ae0 aggregated-ether-options lacp active

     

    #allow vlan tagging on the bundled ae interface

    set interfaces ae0 vlan-tagging

     

    #config the vlan tag on the sub-interface and IP 

    set interfaces ae0 unit 50 description "vlan50"

    set interfaces ae0 unit 50 vlan-id 50

    set interfaces ae0 unit 50 family inet address 10.10.10.2/30

     

    #add the interface to your logical system

    set routing-instances <name-of-logical-system> interface ae0.50

     

    Hope this helps you a little

     

     



  • 3.  RE: Port channel with sub interface config on MX

    Posted 04-05-2015 18:25

    Accepted and kudos !!