Thanks, steve. When I add 16 in eve-ng, I get fxp0 + ge-0/0/0 - 14, so that adds up as soon as I go higher, it reverts to 2 interfaces in the CLI. It is useful to have more, so I can test out the full customer config in the lab with simple 1-1 conversions for the interfaces.
let me add the 15 ge- interfaces do seem to work
root@vSRX-MNHA-1# run show interfaces terse
Interface Admin Link Proto Local Remote
ge-0/0/0 up up
ge-0/0/0.0 up up inet 10.254.13.1/24
gr-0/0/0 up up
ip-0/0/0 up up
lsq-0/0/0 up up
lt-0/0/0 up up
mt-0/0/0 up up
sp-0/0/0 up up
sp-0/0/0.0 up up inet
inet6
sp-0/0/0.16383 up up inet
ge-0/0/1 up up
ge-0/0/1.0 up up inet 10.254.17.1/24
ge-0/0/2 up down
ge-0/0/3 up down
ge-0/0/4 up down
ge-0/0/5 up down
ge-0/0/6 up down
ge-0/0/7 up down
ge-0/0/8 up down
ge-0/0/9 up down
ge-0/0/10 up down
ge-0/0/11 up up
ge-0/0/11.0 up up inet 10.254.254.1/30
ge-0/0/12 up down
ge-0/0/13 up down
ge-0/0/14 up down
dsc up up
Original Message:
Sent: 08-04-2025 19:38
From: spuluka
Subject: vSRX EVAL what is the maximum number of interfaces you can add
From what I see in the documentation the KVM, VMware and HyperV local deploys all only support 6 interfaces plus the fxp0 mgmt interface.
https://www.juniper.net/documentation/us/en/software/vsrx/vsrx-consolidated-deployment-guide/vsrx-consolidated-deployment-guide.pdf
------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home
Original Message:
------------------------------
JNCIE-ENT 907
------------------------------