Hello,
I am running a small VXLAN-EVPN deployment with 2 vMXs running as EVPN L3 Gateways.
I am wanting to use Anycast gateways but the "virtual-gateway-accept-data" seems to be missing from the syntax?
tom@spine_01# set interfaces irb unit 100 virtual-gateway-?
Possible completions:
> virtual-gateway-esi ESI configuration of virtual gateway
virtual-gateway-v4-mac Configure virtual gateway IPV4 virtual MAC address
virtual-gateway-v6-mac Configure virtual gateway IPV6 virtual MAC address
[edit]
Is there a Chassis fpc/pic knob I need to switch on or a license I need?
tom@spine_01> show configuration chassis
fpc 0 {
pic 0 {
tunnel-services;
}
performance-mode;
}
network-services enhanced-ip;
tom@spine_01> show system license
License usage:
Licenses Licenses Licenses Expiry
Feature name used installed needed
scale-subscriber 0 10 0 permanent
scale-l2tp 0 1000 0 permanent
scale-mobile-ip 0 1000 0 permanent
VMX-BANDWIDTH 0 500000 0 60 days
VMX-SCALE 3 3 0 58 days
vmx-subscriber-accounting 0 1 0 60 days
vmx-subscriber-authentication 0 1 0 60 days
vmx-subscriber-address-assignment 0 1 0 60 days
vmx-service-dc 0 1 0 60 days
vmx-service-accounting 0 1 0 60 days
vmx-subscriber-secure-policy 0 1 0 60 days
vmx-pcrf-subscriber-provisioning 0 1 0 60 days
vmx-ocs-charging 0 1 0 60 days
vmx-nasreq-auth-authorization 0 1 0 60 days
vmx-service-qos 0 1 0 60 days
vmx-service-ancp 0 1 0 60 days
vmx-service-cbsp 0 1 0 60 days
Licenses installed:
License identifier: E435890758
License version: 4
Software Serial Number: 20180209
Customer ID: vMX-JuniperEval
Features:
vmx-bandwidth-500g - vmx-bandwidth-500g
count-down, Original validity: 60 days
vmx-feature-premium - vmx-feature-premium
count-down, Original validity: 60 days
My suspicion is that it may be because I am running an older version of the vMX JUNOS (17.2R1.13) - I have tested a later version as it has been unavailable for download recently.
tom@spine_01> show version
Hostname: spine_01
Model: vmx
Junos: 17.2R1.13
Any help/advice appreciated :)
Thanks,
Tom