I just want to know if Junos Space supports 20.4. We have a few bits of hardware on 20.4 yet.
Original Message:
Sent: 11-06-2024 17:13
From: asharp
Subject: Upgrading Junos Space
What are you trying to figure out between Junos Space and with Security Director? Sounds like either doc hasn't been updated, or it could be that 20.4 was only validated with Security Director and not with Junos Space.
I don't know the answer to this unfortunately.
Regards
Original Message:
Sent: 11-06-2024 09:36
From: MARK JOHNS
Subject: Upgrading Junos Space
Following up on this since there seems to be two different references on what firmware is supported on the new Junos Space:
https://www.juniper.net/documentation/us/en/software/junos-space24.1/release-note/24.1/release-note/topics/concept/supported-junos-os-releases.html
and
https://manuals.plus/m/ad48c2455b2d8031c8f92eb006f184f95e79133f1802d93bdc02efad28c218eb
------------------------------
MARK JOHNS
Original Message:
Sent: 11-05-2024 08:23
From: MARK JOHNS
Subject: Upgrading Junos Space
I see firmware 20.3 is supported but what about 20.4?
------------------------------
MARK JOHNS
Original Message:
Sent: 11-04-2024 10:13
From: asharp
Subject: Upgrading Junos Space
You can upgrade to 24.1 only via 23.1R1 albeit via a multi-step approach.
The upgrade process is described in detail here: https://www.juniper.net/documentation/us/en/software/junos-space24.1/junos-space-workspaces/topics/task/junos-space-platform-24.1-upgrading.html
There is no straight-upgrade process, as 24.1 now uses Rocky Linux 9.2 (Blue Onyx), where-as versions earlier than 23.1R1 used CentOS and there is no direct upgrade path. Your upgrade path once you have got to 23.1R1 will involve a multi-step approach as described in the above link.
Regards,