Hi,
Please check this out:
https://www.juniper.net/documentation/us/en/software/junos/mpls/topics/topic-map/pcep-configuration.html#id-understanding-static-segment-routing-lsp-in-mpls-networks__d133097e7220
https://iosonounrouter.wordpress.com/2023/05/03/l3vpns-using-sr-te-paths/
BR
------------------------------
Andrei Cebotareanu
------------------------------
Original Message:
Sent: 10-21-2024 10:34
From: Anonymous
Subject: Segment routing flow on P router
This message was posted by a user wishing to remain anonymous
Hi,
I would like to check the possibility to mark specific EVPN instance on edge router, then insert this specific traffic flow downstream into an SR-TE path on a P router few hops away. For example traffic enters PE router on EPVN1. Traffic follows IGP path and let say at hop 3 along the IGP path i would now like to take this interesting traffic for EVPN1 and send it down a specific SR-TE path. FYI there is no BGP on the P router, just MPLS.
Thanks,