I'm hardware limited, so I have this network setup all running on a local server with VMs. "Router A" and "Router B" are peered in the same neighborhood with subnet 10.10.10.0/24. I also have a "Service A" and "Service B" that point to their own respective private LANs, and service routes on each router that point to their peer's services using a "Peer Service Route". I have 2 additional services on each router that point to their own service address using a "Service Agent" that uses its own "lan-0-0-intf" as the next hop.
I want to send traffic from a device on "Router A" to a device on "Router B". In traditional routing, the WAN interface is usually the next destination, but Juniper SSR might behave differently. On "Router A", should I create a route to the WAN or the LAN address on "Router B"?
------------------------------
Dat Nguyen
------------------------------