Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
Can someone please explain why I am getting below 2 different output for 2 different subnet from the show route forwarding-table.
Please explain as I am new to junos..
User@EX4650-48Y> show route forwarding-table destination 10.11.190.0/24
Routing table: default.inet
Enabled protocols: Bridging,
Destination Type RtRef Next hop Type Index NhRef Netif
default user 0 f4:bf:a8:e0:b9:41 ucst 2057 311 ae0.0
default perm 0 rjct 51 9
10.11.190.0/25 user 0 172.31.1.163 ucst 2079 5167 ae8.0
User@EX4650-48Y> show route forwarding-table destination 10.11.189.0/24
10.11.189.0/24 user 0 172.31.1.163 ucst 2079 5167 ae8.0
Routing table: __master.anon__.inet
Enabled protocols: Bridging, Dual VLAN,
default perm 0 rjct 1826 1
could you please provide the output of
show configuration routing-options | display set
There's no route for 10.11.190.0/24. There's one route for 10.11.190.0/25, but for 10.11.190.0/24 the EX has to fall back to the default route (toward something on interface ae0.0 with MAC address f4:bf:a8:e0:b9:41).
For 10.11.189.0/24 there is specific route toward 172.31.1.163 via ae8.0.
A show route yourprefix (without forwarding-table) would be far more useful and understandable actually.
As there is no match for the prefix 10.11.190.0/24, the forwarding table for this prefix shows two routes - a) for /25 for which there seems to be a route via the ae8.0 interfaces; b) for all the 10.11.190.0/24 destinations outside the /25 prefix, it points to a default route via the ae0.0 interfaces.
For 10.11.189.0/24 as there is an exact match for this prefix, only one egress path via ae8.0 is shown.
Can you please share the outputs of